汽车管道表面燃烧机

执行标准： 此仪器符合902137-03试验要求（汽车管道45度燃烧特性试验机）。符合TL1010?_EN-1997《汽车内饰材料阻燃性标准》、GB8410《汽车内饰材料的燃烧特性》、美标FMVSS571.302、DIN7520《汽车内饰材料的燃烧特性》试验标准（汽车内饰材料燃烧试验机）。 
Execution standard: the equipment is accordance with the requirements of the 902137-03 test (auto pipe combustion characteristic tester 45 degrees). In line with the TL1010? _EN - 1997 "standard of automobile interior trim material flame retardant", GB8410 combustion characteristic of auto interior materials, FMVSS571.302, DIN7520 combustion characteristic of automobile interior trim material test standard (auto interior materials testing machine burning).
 
详细参数：Detailed parameters:


材料全部为镜面不锈钢板结构，
钢板厚度1.2mm
燃烧室尺寸：宽×高×深:1200×800×600mm
试验过程自动控制 带流量计和压力调节（自动点火） 
喷嘴：Φ9.5mm，长约100mm,具有火焰调节功能，蓝色火焰高度：
38mm火焰施加时间及持燃时间可调节汽车内饰材料燃烧试验机 材料全部为镜面不锈钢板结构，
钢板厚度1.2mm
燃烧室尺寸：宽×高×深：385×360×204mm
底部通风孔间距：横向63.5mm，纵向：127mm底部通风孔数量10个、直径19mm
通风槽：360×13mm 喷灯内径：9.5mm，长约100mm,具有火焰调节功能，
蓝色火焰高度：38mm喷嘴口部中心距试样自由端中心以下：19mm试样底面距燃烧箱底面上方：178mm试样支架前端距燃烧箱的内表面：22mm 试验支架二纵外侧离燃烧箱内表面距离：50mm耐热金属丝直径：0.25mm，间距：25mm 金属梳长度大于：110mm，每25mm有7~8个光圆齿收集盘：336×85mm燃气：液化气（自备）电源电压：220V/50Hz
Materials are all receive mirror surface stainless steel plate structure,
Steel plate thickness of 1.2 mm
Combustion chamber size: wide * deep high: 1200 * 800 * 600 mm
Test process automatic control with flow meter and pressure regulation (auto ignition)
Nozzle: Φ 9.5 mm, 100 mm long, has the flame adjustment function, blue flame height:
38 mm applying time and the combustion flame time adjustable car interior material combustion testing machine are all receive mirror surface stainless steel structure, steel plate thickness of 1.2 mm
Combustion chamber size: wide * deep high: 385 * 360 * 204 mm
Vents at the bottom of the spacing: horizontal 63.5 mm, longitudinal: 127 mm at the bottom of the vent number 10, 19 mm in diameter
Ventilation slot: 360 x 13 mm burner inner diameter: 9.5 mm, 100 mm long, has the flame adjustment function, blue flame height: 38 mm nozzle mouth center from the center of the sample free end the following: 19 mm samples above the bottom from burning the bottom surface: 178 mm sample holder front end from the inner surface of the combustion box: 22 mm test stand two longitudinal and lateral distance from burning in the surface: 50 mm hot wire diameter: 0.25 mm, spacing: greater than 25 mm metal comb length: 110 mm, there are 7 ~ 8 per 25 mm round tooth collection plate: 336 x 85 mm gas, liquefied petroleum gas (own) supply voltage: 220 v / 50 hz