跌落

 
专门测试产品包装后，受到坠落之受损情况，及评估搬运时，遭受落下之耐冲击强度。符合GB4857.5《垂直冲击跌落试验方法》试验标准
Specialized test after the product packaging, fall by the damage, and evaluation when handling, suffered from falling impact resistance strength. Meet GB4857.5 "vertical shock drop test method, test standards


1、试验高度：40-170cm
2、试验空间：80×60×40~170cm
3、高度运行：采用马达传动
4、高度控制：采用限位控制，到达设定高度后自动停止
5、具有上升、下降、自动停止功能
6、跌落试验：采用气动控制
7、托盘复位：采用气动复位
8、落点：菱、角、面均可试验
9、冲击底板：1200×1200×90mm,钢板厚度为8mm,底为多筋结构,使冲击台面上任何100mm2的面积上承受10kg的静负荷时,其变形量不超过0.1mm
10、最大承受试件重量:150kg
1, the test height: 40-170 cm
2, test space: 80 * 60 * 40-170 cm
3, altitude: the motor drive
4, height control: using limit control, automatic stop when reach the setting height
5, with rising and falling, automatic stop function
6, drop test: adopt pneumatic control
7, tray reset: adopt pneumatic reset
8 and placement: ling, the Angle, the surface can be test
9, impact plate: 1200 * 1200 * 1200 mm, the thickness of the steel plate is 8 mm, base for steel structure, make the shock table any area in 100 was under 10 kg static load, the deformation is less than 0.1 mm
10, the maximum specimen under weight: 150 kg