鱼尾板价格

清除冲压机床滑块底面、工作台面（或垫板平面）以及模具的上、下模座平面内的任何杂物或异物。手工扳动冲压机床飞轮（或操纵点动按钮），调整上滑块到上死点位置，并转动调节螺杆，鱼尾板生产，将连杆长度调到短（即闭合高度大）。

Remove any material or foreign object on the bottom of the stamping machine slide， working table (or pad plane)， and the upper and lower die base of the mold. Manually pull the stamping machine flywheel (or point moving button)， adjust the upper slider to the upper dead point，鱼尾板价格， and rotate the adjusting screw， the length of the connecting rod to the shortest (i. e. the maximum height of the closed height).

槽钢的锯削：槽钢的锯削与扁钢一样，但是要分二次从宽边面往下锯，不能在一个面上往下锯，应尽量做到在长的锯缝口上起锯，鱼尾板生产商，因此工件必须多次改变夹持的位置。

Channel steel sawing: the channel sawing of the channel steel is the same as that of the flat steel， but it must be sawed down two times from the wide side， and can not be sawed down on one surface， and should be sawed on the long saw mouth as far as  so the  of the clamping must be changed many times.

手锯锯削的注意事项

锯条的松紧要合适，且锯割时压力不能太大，以防折断伤人；

当锯缝歪斜时，鱼尾板，不可急于纠正，而需要慢慢地逐步纠正。

Notice of hand saw cutting

The tightness of the saw blade should be suitable， and the pressure should not be too large during sawing， so as to prevent breaking and hurting people.

When the SAW seam is skewed， it can not be corrected in a hurry， but it needs to be corrected gradually.

鱼尾板价格-圣霖国际【用心服务】-鱼尾板由鞍山市圣霖进出口贸易有限公司提供。鞍山市圣霖进出口贸易有限公司（shenglininternational.cn）拥有很好的服务与产品，不断地受到新老用户及业内人士的肯定和信任。我们公司是商盟认证会员，点击页面的商盟客服图标，可以直接与我们客服人员对话，愿我们今后的合作愉快！