reducer谁家好

齿轮声辐射特征分析 在选择用不同结构形式的齿轮时，对其特定结构建立声辐射模型，reducer谁家好，进行动力学分析，对齿轮传动系统噪声进行预先评估。以便根据使用者的不同要求（使用场所，是 否无人操作，是否在城区内，地上、地下建筑物有无特定要求，是否有噪声防护，或无其他特定要求）去满足。

The acoustic radiation characteristic analysis of gear in the selection of gear with different structure forms，reducer生产厂家， set up the acoustic radiation model to its specific structure， carry on the dynamic analysis，reducer， and evaluate the gear transmission system noise in advance. In order to meet the users'  requirements (use sites， unmanned operati， whether there are specific requirements in the urban area， ground or underground buildings， noise protection， or other specific requirements).

在运转200~300小时后，应进行换油，在以后的使用中应定期检查油的质量，对于混入杂质或变质的油须及时更换。一般情况下，对于长期连续工作的减速机，按运行5000小时或每年一次更换新油.

After running for 200~300 hours， the first oil change should be done. The quality of the oil should be checked regularly in later use， and the oil mixed with impurities or deterioration must be changed in time. In general， for a long-term continuous working reducer， new oil is replaced at 5000 hours or once a year.

减速机内部齿轮齿形修整（修缘和修根）和齿顶倒角 将齿顶的齿形切削成比正确的渐开曲线略呈凸形。当齿轮齿面受外力产生变形时，reducer厂商，可以避免对与之啮合的齿轮产生干涉，并且可以降低噪音，延长齿轮寿命。

The internal gear of the reducer is trimmed (trim and trim) and tooth top chamfering to make the tooth shape of the tooth top  convex than the correct involute curve. When the gear tooth surface is deformed by external force， it can avoid interference to the gears engaged with it， and can reduce noise and prolong the service life of gears.

reducer-圣霖国际【诚实守信】-reducer谁家好由鞍山市圣霖进出口贸易有限公司提供。鞍山市圣霖进出口贸易有限公司（shenglininternational.cn）坚持“以人为本”的企业理念，拥有一支技术过硬的员工队伍，力求提供更好的产品和服务回馈社会，并欢迎广大新老客户光临惠顾，真诚合作、共创美好未来。圣霖国际——您可信赖的朋友，公司地址：辽宁省鞍山市高新区越岭路256号（研发中心A座2号楼510室至511室），联系人：王秋。