辊道厂家

厂商 :鞍山市圣霖进出口贸易有限公司

辽宁 鞍山
  • 主营产品:
联系电话 :13904127277
商品详细描述

中间辊道位于拉矫机和切割设备之间,用于支承和输送铸坯和输送引锭杆。拉坯时,中间辊道与拉速同步,送引锭杆时可以用较高的速度。切割区辊道为切割区四周的辊道,该辊道中有几个辊子需要升降或摆动,以防止切割时切坏辊子和切割渣粘结辊面。



The middle roller is located between the pull straightening machine and the cutting equipment, which is used to support and transport billets and to transport ingot bars. The middle roller,辊道报价, and casting speed synchronization,辊道价格, you can use a higher speed to send dummy bar.

The roller section of the cutting area is the roller table around the cutting area,圣霖国际辊道, and there are several rollers that need to rise or swing in the roller way, so as to prevent the roller and the cutting slag from sticking to the roller surface when cutting.








对于中阀辊道,除了要求对中之外,为了进行精轧人口温度控制,要求轧件能在中间辊道上往复运动,并且为了提高末架粗轧机和精轧机的速度控制精度,以前常用的集体传动方式正在被单独传动方式代替。

For the valve roller, in addition to the requirements of, in order to finish rolling temperature  requirements of population, in the middle of the roller on the reciprocating motion, and in order to improve the frame at the end of roughing mill and finishing mill speed  precision, instead of the commonly used collective transmission mode being separate transmission mode.


为使铸坯平稳迅速地运送,辊道,有时将这个区的辊道设计成可升降的。辊道按驱动方式可分为集中传动辊道和单独传动辊道两种。集中传动辊道由一台电机带动一组辊子,通过电机一减速机一链轮传动,或者通过电机一减速机~长轴一伞齿轮传动方式传动。



In order to deliver the billet smoothly and quickly, the roller table in this area is sometimes designed to be lifted and lifted. The roller table can be divided into two types: the  drive roller and the separate drive roller. The  driven roller table is driven by a motor to a set of rollers, driven by a motor, a reducer or a sprocket, or through a motor, a reducer, a long shaft and a bevel gear transmission mode.


圣霖国际【诚实守信】(图)-辊道价格-辊道由鞍山市圣霖进出口贸易有限公司提供。鞍山市圣霖进出口贸易有限公司(shenglininternational.cn)为客户提供“型材设备,轧钢设备,轨道设备”等业务,公司拥有“圣霖”等品牌,专注于行业专用设备等行业。欢迎来电垂询,联系人:王秋。
标签:
相关产品推荐