减速机厂家联系电话

减速机一般用于低转速大扭矩的传动设备，把电动机、内燃机或其它高速运转的动力通过减速机的输入轴上的齿数少的齿轮啮合输出轴上的大齿轮来达到减速的目的，减速机厂家联系电话，普通的减速机也会有几对相同原理齿轮达到理想的减速，大小齿轮的齿数之比，就是传动比。

Reducer is generally used in driving equipment of low speed high torque，减速机生产商， large gear gear output shaft power motor， internal combustion engine or other high speed running through the reducer input shaft less number of teeth on the reducer to achieve the purpose of general reducer will have several pairs of the same principle to achieve the ideal effect of gear reducer. The size of the number of teeth of the gear ratio，减速机， the transmission ratio is.

在运转200~300小时后，应进行换油，在以后的使用中应定期检查油的质量，对于混入杂质或变质的油须及时更换。一般情况下，对于长期连续工作的减速机，按运行5000小时或每年一次更换新油.

After running for 200~300 hours， the first oil change should be done. The quality of the oil should be checked regularly in later use， and the oil mixed with impurities or deterioration must be changed in time. In general，减速机采购， for a long-term continuous working reducer， new oil is replaced at 5000 hours or once a year.

安装前确认电机和减速机是否完好无损，并且严格检查电机与减速机相连接的各部位尺寸是否匹配，这里是电机的定位凸台、输入轴与减速机凹槽等尺寸及配合公差。

Before installation， confirm whether the motor and reducer are in good condition， and strictly check whether the size of each part of the motor connected to the reducer is match. Here is the size and fit tolerance of the motor's locating lug， input shaft and reducer groove.

减速机采购-圣霖国际(在线咨询)-减速机由鞍山市圣霖进出口贸易有限公司提供。鞍山市圣霖进出口贸易有限公司（shenglininternational.cn）为客户提供“型材设备,轧钢设备,轨道设备”等业务，公司拥有“圣霖”等品牌。专注于行业专用设备等行业，在辽宁 鞍山 有较高知名度。欢迎来电垂询，联系人：王秋。