厂商 ：东莞贵林电子材料有限公司
广东 东莞- 主营产品：
- 防水中接端子
- 铁氟龙热缩管
- 耐高温热缩管
AIS-ES
车用线束含胶热缩套管
High shrink ratio semirigid polyolefin tubing
Applications
应用
AIS-ES汽车线束防水热缩套管，专为汽车工业电子组件、
线束绝缘保护及防水所设计,有较高的4:1收缩比配合耐
高温的聚酰胺热熔胶(Polyamide)，能对水分做充分阻隔
保护线束必免受腐蚀及受潮，外璧为半硬耐磨材质聚烯
烃，对于汽车严格的环境提供充分的保护。
Specifically designed to insulate, seal and protect wire splices, terminations and components in automotive industrial. High shrink ratio 4:1 and high temperature resistant Polymaide adhesive
liner can be against water, moisture and corrosion. Semi-rigid outer wall provides excellent
abrasion protection and strain relief for strict environment requirement .
性能
4:1高倍收缩
优异的完全密封防水性能
半硬耐磨阻燃材质
Characteristics
l High shrink ratio 4:1
l Absolutely seal and water proof
l Semi-rigid flame retardant and abrasion resistance.
操作温度范围
操作温度：-55℃ ~ 130℃
最低收缩温度： 110℃
最低完全收缩温度：135℃
Operating temperature range
Operating temperature : -55℃ ~ 130℃
Minimum shrink temperature : 110℃
Minimum fully recovery temperature : 135℃
Product Dimension 产品规格
|
Part Number 产品型号 |
As supplied收缩前(mm) |
After recovered 收缩后 (mm) |
Standard Length(Meter) 标准长度(米) |
|
|
I.D(min)内径 |
I.D.(max)内径 |
W.T.(min)壁厚 |
||
|
AIS-ES1 |
5.7 |
1.3 |
1.2 |
100 |
|
AIS-ES2 |
7.5 |
1.7 |
1.4 |
50 |
|
AIS-ES3 |
10.8 |
2.5 |
2.0 |
50 |
|
AIS-ES4 |
17.8 |
4.4 |
2.3 |
25 |
Technical Data
|
性能Property |
測試方法Test Method |
結果Typical Data |
|
抗张強度 Tensile strength |
ASTM D 2671 |
10.4Mpa (min.) |
|
断裂伸长度 Tensile strength after aging 158℃、168 hrs |
ASTM D 2671 |
Remains 70% |
|
老化抗張強度158°C, 168小時Elongation at break after aging 158℃、168 hrs |
ASTM D 2671 |
100% (min.) |
|
伸長度老化斷裂158°C, 168小時. Elongation at break |
ASTM D 2671 |
200% (min.) |
|
縱向收縮率 Longitudinal shrinkage |
UL 224 |
0 ~ 10% |
|
熱衝擊250°C, 4小時Heatshock(250℃、4hrs) |
ASTM D 2671 |
No cracking、no dropping |
|
冷彎曲 -40°C, 1小時Cold bend -40℃、1hr |
ASTM D 2671 |
No cracking |
|
绝缘耐压AC 2500V, 60 seconds Voltage withstandAC 2500V、60 seconds |
ASTM D 2671 |
No breakdown |
|
體積電阻体积电阻率積電 阻Volume resistance |
ASTM D 876 |
1014Ω.cm (min.) |
|
阻燃性 flammability |
SAE-AMS-DTL-23053/5 |
Self extinguish in 30 sec. |
|
铜腐蚀158°C, 168hrs Copper corrosion 158℃、168 hrs |
UL 224 |
pass |
|
吸水率 Water absorption |
ASTM D 570 |
< 0.5% |
|
中壁热收缩套热熔胶Thermoplastic Adhesive |
||
|
软化溫度 Softening point |
ASTM D E28 |
105℃ |
标准颜色:黑色
Standard color : Black、
