德国进口臭氧水检测仪

德国进口面板臭氧水检测仪TIZ，范围0-20PPM，精度1%

模拟信号输出: 0/4 20mA,线性

数字信号输出RS485

电源输入：230VAC/50HZ-10VA

环境条件：T〈50度，湿度〈90RH

电极材料：金

水压：6BAR

连接接头：DN25

重量A：0.8kg

重量B：1.7kg

TIZ-OEM尺寸W96   H96   D140  面板形式

专利号：DE421 58 39，认证：CE

国臭氧水面板检测仪TIZ（可选0-4PPM，0-10PPM）

ANSEROS公司专业臭氧在线分析仪：

应用在：饮用水，纯净水，废水，游泳池水等便携臭氧水分析仪

特点：自清洗系统，免维护，过程检测，体积小，寿命长，精度高

ANSEROS TIZ

Measurement of residual ozone in water. In conjunction with the appropriate sensors, the microprocessor-based instrument TIZ-OEM provides measurement, display, and control of dissolved ozone in water. The measuring principle adopted is potentiostatic amperometry.

please contact mr. wang    e-mail: LNSHARK@163.COM  联系邮件

The remaining ozone in water must be controlled. For each kind of water different metering

principles are available:

1- Ozomat WP   0-10PPM,0-100PPM,0-50PPM,0-200PPM
2,TIZ 0-20PPM

4. WM 0-100PPM 

The analyzer type Ozomat WP is recommended by the CEN 14740 with the highest sensitivity.

The limited value for remaining ozone in water can be reliable detected and controlled without any intercrossing by other incredienceses:

Range: 0,001-9,999 mg O3/m3 H2O (10ppb)
Limit: 10 mg 03/m3 = 0,010 mg O3/ltr. (ppb)

Each type of the Anseros monitor is qualified for automotic control of ozone dosage.