厂商 ：山东临朐铁力士破碎设备有限公司
山东 潍坊- 主营产品：
联系电话 ：18663616727
商品详细描述
概述
双齿辊破碎机适用于抗压强度小于240Mpa，湿度小于35%的中硬及软物料的中碎和精碎作业，如煤、焦炭、石油焦、生石灰、硅石、碳素、玻璃管、沥青、化工原料等或与以上硬度相当的固体物产，本机器具有使用维修费特低、性能可靠、粉尘少、噪音低等特点。
双齿辊破碎机配置两个碾辊，辊面分为狼牙齿、环形齿、直条齿、大板齿等，适用于进料粒度小于1000mm，成品粒度要求10-200mm，要求粉末状少、颗粒多的中碎或精碎场合。
如用于热电厂、焦化厂破碎电煤；煤矿破碎大块原煤；钢铁行业破碎焦炭；煤化工行业破碎石油焦；电子行业破碎硅石；碳素行业破碎碳素块；太阳能行业破碎玻璃管；混凝土行业破碎生石灰和沥青等；或者与上述类似的破碎场合。
Summarize
Double teeth roll crusher suitable for compression strength less than 240Mpa,humidity less than 35% of the hard and soft materials,primary operations in the intermediate and coarse crushing.Such as coal,coke petroleum coke,lime,silica,carbon,glass,asphalt,chemical raw materials or solid material with similar hardness.Features: low use and maintenance costs,high reliability,low dust,low noise.
Double-teeth roll crusher has two abrasive rolls.The roll surface is divided into wolf teeth,ring teeth,straight strip teeth,big board teeth and others.Maximum feeding 1000mm,range of the discharge 10-200mm.operations in the intermediate and coarse crushing which has few powder and lots of grains.
Such as for thermal power plants,coking plant crushing coal;breakingraw coal of coal mine;steel industry breakingcoke;petroleum coke breaking in coal chemical industryelectronics industry breaking silica;carbon industry crushing carbon block solar industry breaking waste glass;Concrete industry crushing lime and asphalt;or in the simiar occasions.
2PG Series Double teeth roll crusher
工作原理
双齿碾破碎机是利用两个耐磨合金齿辊，相对旋转产生的高挤压力和剪切力来破碎物料，物料进入两齿辊间隙（V型破碎腔）以后，受到两齿辊相对旋转的挤压力和剪切力作用，来挤轧，剪切和啮磨下，将物料破碎成需要的粒度然后从排料口排出。
Working principle
Double-teeth roll crusher is fixed with two wear-resistant alloy rolls.Their relative rotation generates high extrusion pressure which crushes the material.The material enters into the spacebetween the two rolls,suffered both extrusion and shear force.In the crowd rollig,cutting and grinding,it is crushed into the required size and then sent by the transport equipment.
主要技术参数/Specifications
双齿辊破碎机适用于抗压强度小于240Mpa，湿度小于35%的中硬及软物料的中碎和精碎作业，如煤、焦炭、石油焦、生石灰、硅石、碳素、玻璃管、沥青、化工原料等或与以上硬度相当的固体物产，本机器具有使用维修费特低、性能可靠、粉尘少、噪音低等特点。
双齿辊破碎机配置两个碾辊，辊面分为狼牙齿、环形齿、直条齿、大板齿等，适用于进料粒度小于1000mm，成品粒度要求10-200mm，要求粉末状少、颗粒多的中碎或精碎场合。
如用于热电厂、焦化厂破碎电煤；煤矿破碎大块原煤；钢铁行业破碎焦炭；煤化工行业破碎石油焦；电子行业破碎硅石；碳素行业破碎碳素块；太阳能行业破碎玻璃管；混凝土行业破碎生石灰和沥青等；或者与上述类似的破碎场合。
Summarize
Double teeth roll crusher suitable for compression strength less than 240Mpa,humidity less than 35% of the hard and soft materials,primary operations in the intermediate and coarse crushing.Such as coal,coke petroleum coke,lime,silica,carbon,glass,asphalt,chemical raw materials or solid material with similar hardness.Features: low use and maintenance costs,high reliability,low dust,low noise.
Double-teeth roll crusher has two abrasive rolls.The roll surface is divided into wolf teeth,ring teeth,straight strip teeth,big board teeth and others.Maximum feeding 1000mm,range of the discharge 10-200mm.operations in the intermediate and coarse crushing which has few powder and lots of grains.
Such as for thermal power plants,coking plant crushing coal;breakingraw coal of coal mine;steel industry breakingcoke;petroleum coke breaking in coal chemical industryelectronics industry breaking silica;carbon industry crushing carbon block solar industry breaking waste glass;Concrete industry crushing lime and asphalt;or in the simiar occasions.
2PG Series Double teeth roll crusher
工作原理
双齿碾破碎机是利用两个耐磨合金齿辊，相对旋转产生的高挤压力和剪切力来破碎物料，物料进入两齿辊间隙（V型破碎腔）以后，受到两齿辊相对旋转的挤压力和剪切力作用，来挤轧，剪切和啮磨下，将物料破碎成需要的粒度然后从排料口排出。
Working principle
Double-teeth roll crusher is fixed with two wear-resistant alloy rolls.Their relative rotation generates high extrusion pressure which crushes the material.The material enters into the spacebetween the two rolls,suffered both extrusion and shear force.In the crowd rollig,cutting and grinding,it is crushed into the required size and then sent by the transport equipment.
主要技术参数/Specifications
|
序号 Serial number |
规格型号 Model |
进料粒度 (mm) Feed size |
出料粒度 （可调mm） Discharge size(adjustable) |
生产能力 （t/h） Output |
电机功率 （kw） Power |
保护方式 Protection mode |
传动方式 Driving mode |
|
1 |
2PG0404 |
＜120 |
10-50 |
6-40 |
7.5×2 |
弹簧或液压 Spring or Hydraulic pressure |
三角带或联轴器 Triangular blet or Shaft coupling |
|
2 |
2PG0605 |
＜200 |
10-70 |
10-80 |
15×2 | ||
|
3 |
2PG0806 |
＜300 |
10-90 |
20-150 |
18.5×2 | ||
|
4 |
2PG1008 |
＜400 |
10-110 |
30-200 |
22×2 | ||
|
5 |
2PG0812 |
＜300 |
10-90 |
40-280 |
30×2 | ||
|
6 |
2PG1012 |
＜400 |
10-110 |
50-350 |
37×2 | ||
|
7 |
2PG1212 |
＜700 |
10-140 |
65-450 |
45×2 | ||
|
8 |
2PG1612 |
＜1000 |
10-180 |
80-600 |
90×2 | ||
|
9 |
2PG1618 |
＜1000 |
10-200 |
90-780 |
110×2 |
标签：
相关产品推荐
