厂商 ：昆山市迈吉森复合材料有限公司销售二部
江苏 苏州- 主营产品：
- 发泡剂
- 发泡调节剂
- 热稳定剂
Ｋ100/K400/K500 产品介绍
Foaming regulator introduction
1.促进PVC在低温下熔融
Promote PVC under low temperature melting.
2.加强PVC熔融的内聚力和均质性．
Strengthen PVC melting cohesion and homogeneity
3.加强熔体的强度，伸长度，弹性度．
Strengthen melt strength,elongation,degree of elasticity
4.减少熔融的脉动及不稳定性，促进表面光滑及品质．
Reduce molten pulsation and instability, and promote the surface smooth and the quality.
5.促进PVC均匀塑化和熔体的均一性;
Promote PVC uniform plasticizing and melt homogeneity.
6.在PVC中有良好的分散性
Have good dispersibility in PVC product.
7.在PVC制品中具有极佳的表面光泽度．
In PVC product havs good surface gloss.
8.技术参数technical specification
|
品名Name |
K100 |
K400 |
K500 |
|
参数 Parameter |
参数值 parameter |
参数值 parameter |
参数值 parameter |
|
最低扭矩 Min.torque |
10.4 |
10.3 |
20.4 |
|
最高扭矩Max.torque |
53.2 |
53.7 |
53.5 |
|
平衡扭矩Equilibrium torque |
24.2 |
24.9 |
24.2 |
|
塑化时间 Plasticizing time |
25s |
25s |
23s |
|
说明 Introduction |
适用于需要塑化速度一般，密度比较高的发泡场合；Suited for high density and normal plasticizing speed foaming product： 通用的螺杆Universal screw B.塑化能力通行的螺杆;Suited for good plasticizing capability screw C.使用该调节剂可依据螺杆的塑化能力选择添加或不添加调节剂。According to plasticizing capacity of screw decide adding or not adding foaming regulator. D.适合壁厚≤5mm的PVC发泡。Suited for wall thickness less than 5mm product. E.成分：丙烯酸甲酯+丙烯腈;Composition:methyl acrylate+acrylonitrile F.适合发泡密度≥0.8g/cm3的产品.Suited for foaming density less than 0.8g/cm3 product. |
适用于塑化速度偏快密度小的发泡场合;Suited for higher plasticizing speed and low density foaming product： 新的且塑化强的螺杆;New and high plasticizing capability screw. B. 塑化能力较强的螺杆;High plasticizing capability screw C.使用该调节剂一般需要塑化促进NCR61/GM61/GM605等1-2份。This foaming regulator should match with plasticizer product. D.适合壁厚5-30mm的PVC发泡。Suited for wall thickness between 5mm and 30mm product. E.成分：丙烯酸甲酯 Composition:methyl acrylate F.适合发泡密度≥0.3g/cm3的产品。Suited for foaming density less than 0.3g/cm3 product. |
适用于塑化速度偏慢密度小的发泡场合;Suited for higher plasticizing speed and low density foaming product： A.旧的磨损的螺杆 Old and wearable screw B.塑化能力差的螺杆High plasticizing capability screw C.使用该调节剂，可不加塑化促进剂NCR61/GM61/GM605等。This foaming regulator does not need match with other plasticizing product. D. 适合壁厚2-30mm的PVC发泡。Suited for wall thickness between 2mm and 30mm product. E.丙烯酸甲酯+丁酯 Composition:methyl acrylate+butyl ester F.适合发泡密度≥0.3g/cm3的产品.Suited for foaming density beyond 0.3g/cm3 product. |
