代理邦纳BANNER 通用传感器

邦纳BANNER 通用传感器

QS30 直角螺纹安装或侧面安装传感器

因型号众多，受网页环境以及内容所限，难以在此一一介绍，更多的产品选型，以及产品资料和详细技术参数，请旺旺联系客服或登录纳铁福官网www.natifeat.com下载产品样本，亦可致电我司020-83603755索取，QQ：5620573。

应用示意图（供参考）：

透明瓶侦测计数
检测和计数透明的瓶子在医药业应用是一个困难的挑战。用传统光电传感器感应的光线也许会通过透明材料，或发散的光可能会被反射，造成不可靠的计数结果。
使用超音波传感器可以使用侦测透明的对象，但超音波方案可能无法有一个快速的响应时间，且超音波波幅会太大, 以至于无法测出瓶之间的空隙。此应用需要可靠地计数透明的瓶子。

***选型使用描述：***
World-Beam QS30 透明物传感器能可靠地侦测和计数。QS30特殊的光学设计能调整控制传感器所发射的光到反射板。 稳定和光学信道允许传感器的微型控制器测出微小的变化。另外，当他们迅速通过输送带，快速的500微秒响应时间使传感器能侦测到和计算数量。
QS30ELVC防护等级的是IP67和PW12。 

Clear Container Detection

Plastic container detection is challenging because containers are clear and can have ridges, which may attenuate light differently and can be difficult to detect accurately. In order to count these containers as they move down the conveyor, it is important to have a dynamic sensor that can sense clear or transparent items and do so quickly and accurately.

Deion
The QS30ELVC retroreflective sensor is the ideal solution for detection of clear targets because it has an 8% threshold for clear object detection, which allows a clear object to be detected as long as it attenuates at least 8% of the light passing through it. The sensor has a minimum range of 100 mm, which is great for small conveyors and limited spaces, with a maximum range of 2 m.

The configuration and setup of Banner’s QS30ELVC is quick and easy with a TEACH mode that learns the amount of light reflected back as the clear condition with just a simple touch of a button. The sensor has an automatic compensation algorithm that compensates for dust and contamination on the sensor/reflector for consistent and reliable detection that reduces down time. The QS30ELVC also compensates for ambient temperature changes.

The QS30ELVC has a 500 microsecond response time to accurately detect clear containers in high speed counting applications, and the reflector is available in a square or smaller rectangular shape to meet various user needs. 

饮料盒检测
确认果汁盒的有无。

***选型使用描述：***
当果汁包装盒从传送带上通过时,WORLD-BEAM QS30定区域式传感器检测包装盒的有无,而忽略颜色的变化。

螺纹孔的检测
远距离确认部件上的孔是否是螺纹孔
***选型使用描述：***
从800mm的距离，采用WORLD-BEAM QS30激光传感器检测部件上的孔是否有螺纹。 

QS30系列的传感器从侧面测量木板的平整度
检测木板是否扭曲变形
***选型使用描述：***
当木板在传送带上通过时,高精度WORLD-BEAM雷射光QS30传感器可以检测出由于扭曲变形而比正常高的木板.偏振反射板安装在传感器的对面,这样可以不用同时在传送带的两侧安装。