橡胶塑料滑动摩擦磨损试验仪

厂商 :北京北广精仪设备有限公司

北京 北京
  • 主营产品:
联系电话 :15010964966
商品详细描述

橡胶塑料滑动摩擦磨损试验仪M-200型

符合标准:GB/T 3960-1983 塑料滑动摩擦磨损试验方法 GB/T 9141.8-1999 柔性石墨板材滑动摩擦系数测试方法

Standard: GB/T 3960-1983 plastic sliding friction and wear test method of GB/T 9141.8 1999 flexible graphite plate sliding friction coefficient test method

橡胶塑料滑动摩擦磨损试验仪另外本厂生产的计算机控制塑料滑动摩擦试验机是在现有电子塑料滑动摩擦试验机的基础上又增加了很多试验功能,可以同时显示扭矩-时间曲线,随意设定试验次数,显示当前试验次数,

In addition the factory production of computer control plastic sliding friction testing machine is on the basis of the existing electronic plastic sliding friction testing machine adds a lot of test function, can show the torque - time curve at the same time, set at random testing time, displays the current test number,


橡胶塑料滑动摩擦磨损试验仪主要由试验主机及智能控制系统两大部分构成,通过微机控制系统进行操作试验,在试验过程中同时可以显示数值、扭矩、时间曲线,并可以随意设定试验次数,显示当前试验数值,

Friction and wear testing machine is mainly composed of host and intelligent control system of two parts, through the microcomputer control system operating experiment was carried out, in the process of test curve can display the numerical, torque and time at the same time, and are free to set the number of test, display the current test values,

设定时间及当前试验时间等多种功能,随机配备彩色打印机,可以打印出带有曲线、表格数据等标准要求的试验报告。

Set a time and the test time and so on a variety of functions, random equipped with color printer, you can print out with curve, such as table data standard test report.


橡胶塑料滑动摩擦磨损试验仪功能特点

Function characteristics:

1、试样尺寸: 30mm×7mm×6mm

1, the sample size: 30 mm x 7 mm x 6 mm

2、转动速度: 0-500转/分 (可调)

2, the rotation speed: 0-500 revolutions per minute (adjustable)

3、负 荷: 196N ± 0.1%(可增至392N)

3, negative charge: 196 n + / - 0.1% (can be increased to 392 n)

4、摩擦环尺寸:¢40×10mm ,倒角0.5×45°,外圆表面与内圆同心度偏差小于0.01

4, friction ring size: 40 x 10 mm, ¢0.5 x 45 ° chamfer, cylindrical surface and inner circle concentricity deviation is less than 0.01

5、摩擦环材质:45号钢,淬火,热处理HRC40-45,外圆表面光洁度▼8

5, friction ring material: 45 # steel, quenching, heat treatment HRC40-45, cylindrical surface finish ▼ 8

6、摩擦力矩: 0--4N·m

6, the friction torque: 0-4 n. m

7、砝码重量:4KG砝码一件,1KG砝码4件,可实现重量叠加功能。

7, weight weight: 4 kg weight, 1 kg weight 4 pieces, superposition of weight function can be realized.


橡胶塑料滑动摩擦磨损试验仪附件

Main configuration and accessories: computer control)

1、试验主机一台

1, test host

2、高精度扭矩传感器一只

2, a high precision torque sensor

3、计算机数据采集卡一块

3, computer data acquisition card

4、计算机一台(品牌)

4, a computer (brand)

5、彩色激光喷墨打印机一台

5, color laser inkjet printer

6、计算机控制软件一套

6, a set of computer control software

7、4Kg 砝码两件(备用一套)

7, 4 kg weight in two (a back-up)

8、标准磨擦环四件(备用两件)

8, standard friction ring four pieces (spare two)

9、产品使用说明书一份

A 9, product specification

10、产品合格证

10, product certification

11、产品装箱单一份

11, the product packing list in duplicate

12、整机重量:约87 公斤

12, the weight: 87 kg


适用于塑料制品、橡胶制品、石墨板材或其他复合材料的滑动摩擦,磨损性能测试,也可对试验中试样的磨擦力、磨擦系数和磨损量进行测定。也可对试验中试样的磨擦力、磨擦系数和磨损量进行测定。

Suitable for plastic products, rubber products, graphite sheet or other composites sliding friction, the wear performance test, can also be used to test the sample of friction, friction coefficient and wear volume was measured. Can also be used to test the sample of the friction, friction coefficient and wear volume was measured.

本机采用高精度扭矩传感器,16 位单片机电子处理系统,使得本仪器各项测试指标精度非常高。由于集成程度很高,所以设备本身的稳定性极好,本机具有一次设置,全自动运行,实验结束后自动停机,

The machine adopts high precision torque sensor, 16-bit single chip electronic processing system, make the instrument test indicators accuracy is very high. Because of the high degree of integration, so the stability of the device itself is wonderful, the machine has a setting, automatic operation, automatic stop after the experiment,

标签:
相关产品推荐