LMV324TP

The LMV324TP is CMOS quad op-amps with low offset, stable high frequency response, low power, low supply voltage, and rail-to-rail inputs and outputs. It incorporates 3PEAK’s proprietary and patented design techniques to achieve best in-class performance among all micro-power CMOS amplifiers. The LMV324TP is unity gain stable with Any Capacitive Load with a Constant 1.27MHz gain-bandwidth product, 0.9V/μs slew rate while consuming only 40μA of supply current per amplifier. Analog trim and calibration routine reduces input offset voltage to below 3.5mV. Adaptive biasing and dynamic compensation enables the LMV324TP to achieve ‘THD+NOISE’ for 1kHz and 10kHz 2V_PP signal at -105dB and -90dB, respectively. Beyond the rails input and rail-to-rail output characteristics allow the full power-supply voltage to be used for signal range. This combination of features makes the LMV324TP superior among rail-to-rail input /output CMOS op amps in its power class. The LMV324TP is ideal choices for battery-powered applications because they minimize errors due to power supply voltage variations over the lifetime of the battery and maintain high CMRR even for a rail-to-rail input op-amp. The LMV324TP can be used as cost-effective plug-in replacements for many commercially available op amps to reduce power and improve input/output range and performance.

LMV324TP产品应用:

? Active Filters, ASIC Input or Output Amplifier 

? Sensor Interface 

? Smoke/Gas/Environment Sensors 

? Portable Instruments and Mobile Device 

? Audio Output 

? PCMCIA Cards 

? Battery or Solar Powered Systems 

? Medical Equipment 

? Piezo Electrical Transducer Amplifier