TP2604

产品概述：

The TP2604/2608 are ultra-low distortion, high-voltage CMOS op-amps featuring THD+N of 0.0001% at 1kHz. This feature along with its low noise, very high PSRR makes TP260x ideal choices for professional audio equipments. 

The TP2604/2608 are unity gain stable with 220pF capacitive load with a wide 10MHz bandwidth, 6.5V/μs high slew rate, which makes the device appropriate for current-to-voltage converters. 

The TP2604/2608 can operate from a single-supply voltage of +2.7V to +36.0V or a dual-supply voltage of ±1.35V to ±18.0V. Rail-to-rail output characteristics allow the full power-supply voltage to be used for signal range. 

The TP2604 is dual channel version available in 8-pin SOIC and MSOP package. The TP2608 is quad channel version available in 14-pin SOIC and TSSOP package. 

产品特性：

Ultra-low Distortion: 0.0001% at 1 kHz 

Low Noise: 17 nV/√Hz 

High Slew Rate: 6.5 V/μs 

Wide Bandwidth: 10 MHz 

Low Supply Current: 1.2mA per Amplifier 

Wide Supply Range: 2.7 V to 36 V, or Dual-Supply ±1.35 V to ±18 V 

Low Input Offset Voltage: 0.5 mV Typical 

Low VOS TC: 2.0 μV/°C 

Low Input Bias Current: 0.04 pA Typical 

Rail-to-Rail Output Voltage Range 

Unity Gain Stable for 220pF Capacitive Load 

Drive 600 Ω Load 

–40°C to 125°C Operation Range 

Green, Popular Type Packag

产品应用：

Professional Audio Equipments 

Line Drivers or Line Receivers 

Pre-amplification and Filtering 

PCM DAC I/V Converter 

Transducer Amplifier 

Data Acquisition