厂商 ：成都固特机械有限责任公司
四川 成都- 主营产品：
- 钢筋调直切断机
- 钢筋切断机 弯曲机
- 搅拌机 灰浆泵灌浆泵
| 型号 | 切断弯曲直径 | 连续切断 | 电机功率 | 电机转速 | 外形尺寸 | 重量 |
|
| GQ40AG | 6-40mm | 32r/min |
3kw-2p |
2880r/min | 1280*460*700 | 400kg |
|
| GW40AG | 6-40mm | 8/11r/min | 3kw-4p | 1420r/min | 850*760*800 | 310kg |
|
产品优点
★箱体采用全封闭式设计，可杜绝在重负荷时机器变形和装卸机器时漏油发生。
★内部齿轮，齿轮轴，工作盘，停止块、桩头套，均采用淬火、回火、高频等热处理过的优质合金钢，12mm厚的箱体，可在重负荷下工作，使用寿命长。
★采用防尘制动电机，行程开关，在紧急停止和重启状态下也能保证弯曲角度的精确性。
★插入式的定位销，可移动桩头，可精确调节弯曲角度。
★高效节能
Advantages of the products
★GW35D adopts the fully enclosed GEAR BOX separated from the working disk for no distortions even under the condition of heavy loads and no oil leaking while lifting the machine.
★GEARS, GEAR SHAFTS, WORKING DISK, STOP GAUGE, SADDLES, PILE HEAD and PILE HEAD BUSHES made of high-quality alloyed steel with proper heat treatment (quenching/ tempering/ high frequency) and 12mm thick external case to ensure high performances also under heavy loads and long working life.
★Dust proof BRAKE MOTOR and TWO LIMIT-SWITCH to ensure the accuracy of the bending angle also after stopping and restarting.
★Insert-pin type disk and movable saddles for a precise adjusting of the bending angle.
★High bending efficiency with low power consumption.
