膨胀系数测试仪

GCPZY-100塑料高分子材料膨胀系数测试仪

GCPZY-100 plastic polymer material expansion coefficient testing apparatus

产品概述：

Product overview:

该装置用于测试橡胶,塑料等高分子材料在一定温差下测量长度的变化值，由此可计算其一定温度下的平均膨胀系数，参照国标：GB1036-2006测试方法。

The device is used for test of rubber, plastic and other polymer material measuring length changes in a certain temperature difference value, which can calculate the average expansion coefficient, the temperature of the reference standard test method for: GB1036-2006.

主要技术参数：

Main technical parameters:

1 最高炉温：室温-1000℃。

The 1 highest temperature: room temperature -1000 ℃.

2 升温速度，实验过程控制参数，含PID参数。

2 the heating speed, the experimental process control parameters, including PID parameters.

⑴由智能仪表实现全过程任意调节、设置、锁定。操作见仪表说明书。

⑴ by the intelligent instrument to realize the whole process of arbitrary regulation, setting, lock. See the manual operation instrument.

⑵提供由上位机（计算机）接口，可实现在线检测。

The provided by the host (computer) interface, can realize online detection.

3 电源电压：220V±10﹪，50HZ

The 3 power supply voltage: 220V ± 10％, 50HZ

4 恒温水槽最高温度可达100度，加热最大功耗≤2KW

4 constant temperature water tank temperature can reach 100 degrees, the heating power ≤ 2KW

5 膨胀值测量范围与误差：0--5㎜±0.1%

The 5 expansion value measurement range and error: ± 0.1% 0--5 mm

6 控温精度：±0.1℃ 温度记录值误差≤±0.5﹪

Temperature control accuracy: 6 ± 0.1 ℃ temperature record value error less than ± 0.5％

7 测量膨胀值分辨率：1um

7 measuring the expansion value resolution: 1um

8．测量容积1.8升，不锈钢真空保温。可装低温液体进行低于环境温度的线膨胀系数测试试验。

8 measurement of the volume of 1.8 litres, stainless steel vacuum insulation. Can be installed in cryogenic liquid is lower than the environment temperature linear expansion coefficient test test.

9．测试容积温度检测：最小分辨：0.1℃

The 9 test volume temperature detection: the minimum resolution: 0.1 ℃

10．测试架石英管，以及石英外管，石英活塞顶杆

The 10 test frame quartz tube, quartz tube, quartz rod, piston top

11．样品大小：最大50长*20宽*3—6厚（mm）

11 sample size: 50 maximum length *20 width *3 6 thickness (mm)

12．测试系统满足标准：GB/T 20673-2006,GB1036-89 塑料线膨胀系数测试定方法的技术要求和精度要求。

12 test system meet the standards: GB/T 20673-2006, GB1036-89 plastic linear thermal expansion coefficient of the technical requirements of test method and the precision requirement.

13．采用石英标样标定仪器系统

13 using quartz calibration instrument system standard sample

产品配置：

Product configuration:

测试主机一台，

A test mainframe,

低温水槽一台；

Cryogenic tank a;

测试软件一套，

A set of test software,

计算机一台，

A computer,

标样一个

Standard sample a