球压痕硬度仪Ballindentationhar

Meet the standard:

GB-T3398.1-2008-塑料硬度测定仪第1部分：球压痕法

GB-T3398.1-2008- plastic hardness tester first parts: ball indentation method

GBT 3398.2-2008 塑料 硬度测定 第2部分：洛氏硬度

GBT 3398.2-2008 plastic hardness test part second: Rockwell hardness

GBT 23257-2009 埋地钢质管道聚乙烯防腐层

GBT 23257-2009 polyethylene coating for buried steel pipeline

产品概述：

Product overview:

塑料球压痕硬度仪是在指用直径为5MM的钢球，在规定试验负荷作用下，垂直压入试样表面，保持30S后计算球压痕面积上所承受的平均压力测试仪。

Plastic ball indentation hardness tester is refers to the use of 5MM diameter steel ball, in the specified test load, vertical pressure into the surface of the sample, the average pressure tester is calculated to keep 30S received after the ball indentation area..

产品特点：

Product features:

1、 本仪器核心控制部分通过7寸触摸屏设置参数并控制。

1, the instrument is the core control part through a 7 Inch Touch screen set up parameters and control.

2、 本仪器变形采集利用国内领先的微型位移传感器技术，最小位移采集精度为：0.001MM，淘汰了利用数字千分表采集 位移精度 低、易坏及需要更换电池等缺陷

2, the collection and utilization of micro displacement sensor deformation technology leading, minimum displacement precision: 0.001MM, eliminated using digital micrometer acquisition displacement precision is low, easily broken and the need to replace the battery and other defects

3、 设置好参数后，点开始实验后自动加载，实验结束后自动计算结果，同时压头自动复位到初始位置进行下次实验

3, after parameter setting, some began to automatic loading experiment, automatic calculation results after the experiment, at the same time indenter automatic reset to the initial position for the next experiment

4、 本仪器带有微型打印机，可以对试验结果进行打印。

4, the instrument with a micro printer, you can print the test results.

5、 本仪器具有3种实验类型：球压痕实验、洛氏硬度、耐压实验

5, this instrument has 3 types of experiments: ball indentation experiment, Rockwell hardness, withstand voltage test

技术参数：

Technical parameters:

1．初负荷：

1 initial load:

球压痕：9.8N

Ball indentation: 9.8N

洛氏：98.07N

Rockwell: 98.07N

2．试验负荷：

2 the test load:

球压痕：49N、132N、358N、612N、961N

Ball indentation: 49N, 132N, 358N, 612N, 961N

洛氏：588.4N、980.7N

Rockwell: 588.4N, 980.7N

3．压头直径：

3 head diameter:

球压痕：Ф5mm，Ф10mm

Ball indentation: Phi 5mm, Phi 10mm

洛氏：Ф3.175mm，Ф6.35mm，Ф12.7mm

Rockwell: Phi 3.175mm, Phi 6.35mm, Phi 12.7mm

4．试样高度：4mm

The 4 sample height: 4mm

5．压痕深度指示最小分度值：0.001mm

5 the indentation depth indicating the minimum graduation value: 0.001mm

6．计时量程：可以设定

6: you can set time range

7．计时精度：±1%

Timing accuracy: 7 ± 1%

8．示值精度：±1%

8: the indicating accuracy of ± 1%

9．主机变形量：≤0.04mm

9 host deformation: ≤ 0.04mm

主要配置及附件：

The main configuration and accessories:

主机一套

Host a

主机压头 ￠5mm

The host head - 5mm

微型打印机一台

A miniature printer

使用说明书一份:

Using a manual:

备注：本仪器标准随机配件为球压痕实验，如需要其它实验，请另行选配

Note: this instrument standard random accessories for the ball indentation experiments, such as the need for other experiments, please use separate selection