如何判定测试材料需多大电压英文版

如何判定测试材料需要多大电压可以击穿 How to determine the test material need much can breakdown voltage 如何判定测试材料需要多大电压可以击穿，可以通过材料的介电强度和材料的厚度来判断，一种材料的介电强度值是一定的，击穿电压值和厚度是成正比的，材料越厚，击穿电压值会越大， How to determine the test material need much voltage breakdown, judging by the dielectric strength of the material and the thickness of the material, the dielectric strength of a material is a certain value, the breakdown voltage value and the thickness is proportional to, thicker materials, breakdown voltage value will be greater, 介电强度是一种材料作为绝缘体时的电强度的量度.它定义为试样被击穿时,单位厚度承受的最大电压,表示为伏特每单位厚度.物质的介电强度越大,它作为绝缘体的质量越好 Dielectric strength is a material used as a measure of strength of electrical insulator. It is defined as the sample breakdown voltage, maximum thickness of affordable units, expressed as volts per unit thickness. The dielectric strength of the material, the better the quality of it as an insulator 若客户第一次做测试，还是不知道材料的介电强度，但是如何判定测试材料需要多大电压可 以击穿呢，以下我司归纳了一般材料需要的击穿强度值 If the customer to do the first time test, still do not know the dielectric strength of the material, but how to judge the test material need much voltage The breakdown, the Division I summarizes the breakdown strength of general material required values DDJ-10KV(1万伏)主要用于薄膜材料，丙烯薄膜聚乙烯薄膜.聚酯薄膜，流延聚丙烯薄膜，一般厚度为1-3mm DDJ-10KV (10000 V) is mainly used for thin film materials, propylene films of polyethylene film. Polyester film, cast polypropylene film, general thickness of 1-3mm DDJ-30KV(3万伏)主要适用于橡胶，绝缘漆漆膜，聚氨酯，硫化橡胶等推荐可测厚度2-3mm DDJ-30KV (30000 V) is mainly used in rubber, insulation paint, polyurethane, rubber etc. recommended measurable thickness 2-3mm DDJ-50KV(5万伏)主要用于电缆纸，电容器纸，云母，陶瓷，推荐可测厚度为2-3mm DDJ-50KV (50000 V) is mainly used for cable paper, capacitor paper, mica, ceramic, recommend measurable thickness of 2-3mm DDJ-100KV(10万伏)适用于玻璃，层压材料，橡胶，树脂，推荐可测厚度为2-5mm DDJ-100KV (100000 V) is suitable for glass, laminated materials, rubber, resin, recommend measurable thickness of 2-5mm DDJ-150KV(15万伏) 适用于塑料、橡胶、层压材料、薄膜、树脂、云母、陶瓷、玻璃、绝缘漆等绝缘材料,推荐可测厚度为1-6mm DDJ-150KV (150000 V) can be used for plastic, rubber, lamination material, film, resin, mica, ceramic, glass, insulating paint and other insulating materials, recommended measurable thickness of 1-6mm 电压击穿强度技术资料 Voltage breakdown strength of technical information 电压击穿强度技术软件功能: Functions of voltage breakdown strength of software technology: 01、软件平台：WINDOWS窗口操作平台，界面直观，便于操作 01, the software platform: WINDOWS windows operating platform, intuitive interface, easy operation 02、曲线显示：在实验过程中可以动态显示试验曲线 02, curve display: during the experiment can dynamically display the test curve 03、数据导出：可以对试验结果导入EXCEL表格 03, export data: the results of test can be imported into EXCEL table 04、实验报告：可以人为设置报告名称，并对实验报告进行打印 04, the experiment report: can be artificially set report name, and print the test report 05、试验方式：可以根据需求对直流试验和交流试验进行灵活选择 05, test mode: can flexibly select the DC test and AC test according to the demand of 06、试验方法：可以根据需求自行选择击穿电压、耐压试验、梯度试验 06, test method: you can choose the breakdown voltage, voltage withstand test, gradient test according to the demand of 07、参数设置：可以根据不同的试验方式及试验方法灵活设置所需的不同参数值 07, setting of parameters: according to the different parameters in different ways and test methods flexibly set the required value 08、试样设置：可对不同标准的试样参数灵活设置 08, sample setting: can the sample parameters of different standard flexible settings 09、人员管理：设置用户名及密码，不同的操作员登入进行不同的试验，互不影响 09, personnel management: set the user name and password, different operators in different test, do not influence each other 10、标准选择：含有不同标准，可根据需求自行选择 10, the standard choice: containing different standard, according to their needs 11、连续操作：连续操作试验时，可直接在软件里结束试验，进行二次试验 11, continuous operation: continuous operation test, can finish the test in the software, test two time 电压击穿强度技术适用范围及功能 Voltage breakdown strength of the scope and function 主要适用于固体绝缘材料（如：塑料、橡胶、层压材料、薄膜、树脂、云母、陶瓷、玻璃、绝缘漆等绝缘材料及绝缘件）在工频电压或直流电压下击穿强度和耐电压的测试。 Mainly applicable to solid insulation materials (such as: plastic, rubber, lamination material, film, resin, mica, ceramic, glass, insulating paint and other insulation materials and parts) in the frequency of the voltage or DC voltage breakdown strength and voltage withstand test. 本仪器由电脑控制，是我公司自主研发的全新第二代介电击穿检测仪器，本仪器电子控制系统是通过西门子PLC控制，数据采集方式通过光电隔离，有效解决试验过程中的抗干扰问题，软件操作使用方便，能够实时显示动态曲线，同时升压速率无级可调，可以根据自己的需要进行升压速率调节，调节范围在10V-5000V/S，处于国内领先地位（国内唯一能达到此功能的厂家），使升压速率真正做到匀速、准确，并能够准确测出漏电电流的数据。可实时绘制试验曲线，显示试验数据，判断准确，并可保存，分析，打印试验数据。 The instrument is controlled by computer, is my company developed a new second generation dielectric breakdown testing instrument, the instrument of electronic control system is controlled by Siemens PLC, data acquisition through a photoelectric isolation, effectively solve the problem of interference in the process of software test, convenient operation and use, to show the real-time dynamic curve, at the same time, the rate of pressure rise stepless adjustable, can according to their own needs to boost rate adjustment, adjustment in the range of 10V-5000V/S, in the domestic leading position (the only domestic manufacturers can achieve this function), so that the pressure rate truly uniform, accurate, and can accurately measure the leakage current data. May the real-time rendering curves, test data show that, to judge accurately, and can save, print the test data analysis. 本系统能够自动判别试样击穿并采集击穿电压数据及泄露电流，同时能够在击穿的瞬间电压迅速降低自动归零。软件系统操作方便，性能稳定，安全可靠。 The system can automatically determine the sample breakdown and breakdown voltage and leakage current data acquisition, and can rapidly reduce the auto zero in instantaneous voltage breakdown. The software system is easy to operate, stable performance, safe and reliable. 电压击穿强度技术满足标准： Voltage breakdown strength to meet the standard: GB/T 1408-2006 绝缘材料电气强度试验方法 GB/T 1408-2006 test methods for electrical strength of insulating materials GB/T1695-2005 硫化橡胶工频电压击穿强度和耐电压强度试验 GB/T1695-2005 vulcanized rubber power frequency voltage breakdown strength and voltage withstand strength test GB/T3333 电缆纸工频电压击穿试验方法 GB/T3333 cable paper power frequency voltage breakdown test method HG/T 3330绝缘漆漆膜击穿强度测定法 HG/T 3330 insulating paint breakdown strength determination GB/T 12656 电容器纸工频电压击穿试验方法 GB/T 12656 Condenser Paper power frequency voltage breakdown test method ASTM D149 固体电绝缘材料在工业电源频率下的介电击穿电压和介电强度的试验方法. Test method for materials at commercial power frequencies the dielectric breakdown voltage and dielectric strength of ASTM D149 solid electrical insulation 电压击穿强度技术设备主要配置 设备标准配置 序号 名称 配置 备注 01 试验主机 一台 02 控制装置 一套 03 试验电极 二套（三只） 04 试验油箱 二只 05 放电系统 一套 06 控制系统 一套 07 数据采集系统 一套 08 试验软件 一套 安装盘 09 计算机 一套 品牌 10 喷墨打印机 一台 品牌 11 产品使用说明书 一份 12 保护电阻 一个 13 国家一级计量证书 一份 13 产品合格证 一份 电压击穿强度技术试验界面： 1、 试验主界面截图 2、参数设置界面截图： 3、打印预览界面截图： 冠测公司真诚欢迎全国朋友来电来函洽谈业务！！并预祝合作愉快！！可根据客户的不同需求开发标准、非标准设备