厂商 ：上海德托机械有限公司
上海 上海- 主营产品：
- 过滤产品
- 管件产品
- 电机产品
The calliper type disc brakes for use in industrial application had been developed to meet the requirements of relatively small brakes. Due to the compact design, the unit needs only very little axial space. The brakes are strong, have a very fast response time and show no servo-effects which make them ideal for braking in both rotating directions. There is no limitation of the maximum disc diameter. The modular system allows an adaption to nearly all applications by combining the various basic callipers with the appropriate thrusters.
The shown disc brakes are only a fraction of the whole product range. On request we will send a detailed catalogue. Please send us the technical datas of your application, and we will carry out the brake selection.
盘式刹车卡钳式的用于工业应用程序已经被开发出来,用来满足市场需求相对较小的刹车。由于设计紧凑,对于轴向空间要求比较小。刹车不仅后劲大而且反应速度相当灵敏而且并无伺服效应可以使刹车理想的朝两个方向旋转。圆盘的最大直径是没有限制的。通过把各种基本卡钳与适当的推进器相结合模块化系统可以适应几乎所有的应用程序。
盘式制动器是只有显示了我们公司有所产品的一部分。在请求我们将发送一个详细的目录。请寄给我们您的应用程序的技术资料,我们将帮你们选择适当的制动器以满足你们的需求。
Rietschoten(Deutsche van Rietschoten & Houwens) 摩擦片 Rietschoten(Deutsche van Rietschoten & Houwens)弹簧制动器 制动片 Rietschoten(Deutsche van Rietschoten & Houwens)抱闸 Rietschoten(Deutsche van Rietschoten & Houwens)制动钳 气动制动器 Rietschoten(Deutsche van Rietschoten & Houwens)液压制动器 Rietschoten(Deutsche van Rietschoten & Houwens)工业盘式制动器 Rietschoten(Deutsche van Rietschoten & Houwens)抱闸制动器 Rietschoten，盘工业盘式制动器，Rietschoten，液压操作卡钳，Rietschoten，弹簧刹车制动钳，Rietschoten，气动刹车制动钳
Rietschoten，mechanical, pneumatic, hydraulic, electrical and spring applied disc brake systems
discs, hubs,Rietschoten， clamping devices and Rietschoten，couplings
Rietschoten，open-loop and closed-loop controllers, Rietschoten，pressure supplies and monitoring systems
Rietschoten，supports, mounting brackets
Industrial Disc Brakes
盘工业盘式制动器
Rietschoten Calliper type MUH
Rietschoten制动钳的常用型号：RietschotenRietschoten MUH
This disc brake needs only a little space and is designed for use in smaller machines. The braking force is created by a spring which is compressed by turning the hand wheel. Suitable for soft braking with small braking forces. Braking force: per calliper 450 N.
Rietschoten Calliper type MUH：Calliper MUH型号：这种制动盘所需的空间相对较小，是专门为较小的机器设计使用的。这种制动盘的力量源于用把手压缩一个弹簧而来的，适用于带有小制动钳的软制动器。
制动器的力量：每个制动钳：450N.
Rietschoten Calliper type R&H 100.098.0
制动钳的常用型号：Rietschoten R&H 100.098.0
This spring applied, manually adjusted calliper type is designed for holding or light web tension duties. The braking force is up to 880 N per calliper.
这种手动弹簧调整制动钳是专门为那些张力较小的机器使用的。每个制动钳的刹车力可以达到880N
Rietschoten Calliper type R&H 200.096.01
制动钳的常用型号：R&H 200.096.01
The calliper is designed for higher forces. By the flange at the side it can be easily bolted directly to a gear box without using any brackets. The maximum braking force is 5.000 N.
这种制动钳是专门为张力需求较高的机器而设计的。通过旁边的法兰他可以在通过不需要任何固定装置的情况下直接连接一个齿轮箱。最大的制动功率可达5000N
Rietschoten pneumatically operated brakes
气动刹车。
Rietschoten Calliper type MU-101
制动钳型号：Rietschoten MU101
This calliper of a simple design is ideal for light duties with limited space. It is ideal for small web tension duties. Braking force per calliper: 430 N at p = 5 bar.
这种制动钳的设计较简单，是专门为制动力量需求较小的工具而设定且所占空间较小。制动功率每个制动钳是430N。
Rietschoten Calliper type R&H 100
制动钳型号：Rietschoten R&H 100
For medium loads. There are 4 different standard thrusters available for this calliper. The shown type R&H 100.103.01 achieves a braking force of 800 N at 5 bar air pressure.
这种制动钳适用于中等负载的机器使用。它适用于四种不同型号的推进器，上面那种型号的制动力量是800N
Rietschoten alliper type R&H 200.107.01
制动钳型号: Rietschoten R&H 200.107.01
For medium to high loads. There are a lot of various thrusters in single or tandem design available. The maximum braking force is 10.000 N per calliper.
此制动钳可供高等负载的机器使用，有多种不同型号的推进器在单一货串联等设计下可使用此种制动钳。最大的制动力量为：10000N
Rietschoten Calliper type MRA
制动钳的型号：Rietschoten MRA
For medium to high loads. There are a lot of various thrusters in single or tandem design available. The maximum braking force is 10.000 N per calliper.
此制动钳可供高等负载的机器使用，有多种不同型号的推进器在单一货串联等设计下可使用此种制动钳。最大的制动力量为：10000N
Rietschoten Calliper type MXB
制动钳的型号：Rietschoten MXB
Showing the advantage of continuous developments – compact design and less necessary space – this calliper type can be used on all applications where simple and reliable brakes are required. Using a B-size thruster the braking force is 7.000 N.
此类制动钳可以显示制动钳持续发展的优势。它的设计相对来说比较紧凑因此所需空间较小。这种制动钳适合于各方面的应用。可使用B尺寸的推进器，最大的制动力量为：7000N
Rietschoten Calliper type R&H 300.108.04
制动钳型号：Rietschoten R&H 300.108.04
This calliper type is designed for heavy duty applications with high braking power. The minimum disc diameter is 560 mm, the disc thickness is 30 mm or 38 mm. The braking force is 14.000 N at 5 bar operating pressure.
这种制动钳适合于重型机器的运用。，并带有较高的制动力量。最小制动盘的直径是：560MM，制动盘的厚度是30或者38mm。制动器的力量为：14000N
Rietschoten Calliper type GMRP
制动钳的型号：Rietschoten GMRP
The strongest calliper type in this range of brakes is designed for heavy duty operations and high braking forces. It will fit to a disc of minimum 610 mm diameter, the thickness must be 25.4 or 40 mm.
这种制动钳是所有制动钳种力量最大的一个，专门为重型机械和高需求制动力量而设计的。它适合最小制动盘的直径是610mm，厚度必须是25.4or 40mm.
Rietschoten hydraulically operated calipers
液压操作卡钳
Rietschoten Calliper type R&H 100.250.01
制动钳的型号Rietschoten：R&H 100.250.01
A calliper designed for medium duties. The fluid used for operation is mineral oil type HLP. An operation with water-glycol-emulsion (e.g. Houghtosafe 520) is also possible. The braking force at 100 bar is 2.000 N per calliper.
这种制动钳适合中等负载机械使用。用于次种机器的矿物质油的型号是：HLP。水醇乳液也可用于此操作，制动力量是2000N
Rietschoten Modular brake type T 20 / T 40
制动钳的型号是：Rietschoten T 20 / T 40
These calliper types are direct hydraulically operated and due to the compact design ideal for operation under limited space. The braking forces at 100 bar operating pressure are: T 20 = 14.000 N, T 40 = 34.000 N.
这种制动钳直接用液压操作，设计比较紧凑空间运用比较狭小，制动力量是14000N.
Rietschoten Modular brake type 500
制动钳的型号：Rietschoten 500
Designed for use in Wind turbines, ships propulsion and heavy industry. The housing is electroless nickle plated for optimized corrosion protection. The braking force is 68.000 N at 100 bar.
此类制动钳适用于涡轮机，船舶推进和重型机械。内部的防护装置具有防腐蚀的作用。制动力量可达到：68000N.
Rietschoten Calliper type MU-402
制动钳的型号：Rietschoten MU-402
The MU-402 is for use in light application as a failsafe brake. It needs only a little space. The braking force is 850 N, the necessary air pressure to release the brake is 5 bar.
这种型号的制动钳作为一个保护装置应用于轻工业。所需空间不大，制动力量为80N。所需的空气压力在5bar.
Rietschoten Calliper type R&H 200.406.01
制动钳的型号：Rietschoten R&H 200.406.01
The spring operated, air released calliper of the R&H 200 series is suitable for holding and stopping duties. For releasing the brake an air pressure of 5 bar is necessary. A manual release device is integrated in the thrusters. The braking force is 5.000 N per calliper.
这种通过使用弹簧和空气压力相结合操作使用的制动钳是用来保持和阻止工作任务的。释放刹车所需工作压力是5bar,它是通过一个手动释放装置和推进器相结合而进行工作的。
制动力量是：5000N
Rietschoten Calliper type MX 15 S
制动钳的型号是Rietschoten MX15S
The spring operated, air released calliper of the MX series is suitable for holding and stopping duties. For releasing the brake an air pressure of 5 bar is necessary. An automatic pad wear compensation is integrated.
这种通过使用弹簧和空气压力相结合操作使用的制动钳是用来保持和阻止工作任务的。释放刹车所需工作压力是5bar，与一个自动磨损衬垫相结合。
Rietschoten Calliper type GMRSP/T
制动钳的型号是：Rietschoten GMRSP/T
This spring operated, air released calliper was developed for the use in heavy industries. For releasing the brake an air pressure of 4,5 bar is necessary. A manual release device is integrated in the thrusters. The braking force is 33.000 N per calliper.
这种通过使用弹簧和空气压力相结合操作使用的制动钳应用于重工业领域。释放刹车所需工作压力是4.5ba，人工释放装置和推进器相结合。制动钳的力量是：33000N
