厂商 ：东莞安规检测技术有限公司
广东 东莞- 主营产品：
- 非标类产品
- 防风罩
- 灯头量规
联系电话 ：13650052332
商品详细描述
E12灯头止规 7006-28C-1
E12 Not Go gauge for caps on finished lamps 7006-28C-1
目的：
检验成品灯上E12灯头螺纹最小外径（尺寸d）。
PURPOSE:
To check the minimum outside (major) diameter of the screw thread, dimensiion d, of E12 caps on finished lamps.
检验：
当量规套在成品灯（灯头朝上）的灯头螺纹上时，灯头中心触点不应凸出量规的X面。
检验仅利用量规自身重量进行。
TESTING:
When the gauge is placed over the thread of the cap on a finished lamp, held cap uppermost, the centre contact shall not project beyond surface X. Only the mass of the gauge itself shall be used in the test.
E12 Not Go gauge for caps on finished lamps 7006-28C-1
目的：
检验成品灯上E12灯头螺纹最小外径（尺寸d）。
PURPOSE:
To check the minimum outside (major) diameter of the screw thread, dimensiion d, of E12 caps on finished lamps.
检验：
当量规套在成品灯（灯头朝上）的灯头螺纹上时，灯头中心触点不应凸出量规的X面。
检验仅利用量规自身重量进行。
TESTING:
When the gauge is placed over the thread of the cap on a finished lamp, held cap uppermost, the centre contact shall not project beyond surface X. Only the mass of the gauge itself shall be used in the test.
相关产品推荐
