PA66塑料原料ZytelST801

厂商 ：东莞市兰天塑化有限公司

广东 东莞
  • 主营产品：
  • TPEE
  • POM
  • PMMA
联系电话 ：13642878068
商品详细描述

CAMPUS? datasheet | Zytel? ST801AW NC010


This datasheet of Zytel? ST801AW NC010 from DuPont Engineering Polymers is provided by the international plastics database CAMPUS.

This datasheet includes:

Rheological properties - Mechanical properties - Thermal properties - Electrical properties - Other properties - Film Properties - Diagrams
? Zytel? ST801AW NC010 | PA66-I | DuPont Engineering Polymers
Product Texts
ISO 1043: PA66-HI

Common features of Zytel? nylon resin include mechanical and physical properties such as high mechanical strength, excellent balance of stiffness and toughness, good high temperature performance, good electrical and flammability properties, good abrasion and chemical resistance. In addition, Zytel? nylon resins are available in different modified and reinforced grades to create a wide range of products with tailored properties for specific processes and end-uses. Zytel? nylon resin, including most flame retardant grades, offer the ability to be coloured.

The good melt stability of Zytel? nylon resin normally enables the recycling of properly handled production waste. If recycling is not possible, DuPont recommends, as the preferred option, incineration with energy recovery (-31kJ/g of base polymer) in appropriately equipped installations. For disposal, local regulations have to be observed.

Zytel? nylon resin typically is used in demanding applications in the automotive, furniture, domestic appliances, sporting goods and construction industry.

Zytel? ST801AW is an unreinforced, weatherable, super tough polyamide 66 for injection molding and extrusion. It offers outstanding impact resistance over a wide temperature and humidity range and high productivity.

Food compliance:

Not compliant for EU

Typical applications:

Parts requiring high impact resistance, such as housings, ski-boot components.

top
Rheological properties dry / cond Unit Test Standard
Molding shrinkage, parallel 2.1 / * % ISO 294-4, 2577
Molding shrinkage, normal 1.9 / * % ISO 294-4, 2577
top
Mechanical properties dry / cond Unit Test Standard
Tensile Modulus 2000 / 800 MPa ISO 527-1/-2
Stress at 50% strain 50 / 48 MPa ISO 527-1/-2
Strain at break >50 / >50 % ISO 527-1/-2
Charpy impact strength, +23°C N / - kJ/m? ISO 179/1eU
Charpy impact strength, -30°C N / - kJ/m? ISO 179/1eU
Charpy notched impact strength, +23°C 80 / 120 kJ/m? ISO 179/1eA
Charpy notched impact strength, -30°C 23 / 22 kJ/m? ISO 179/1eA
top
Thermal properties dry / cond Unit Test Standard
Melting temperature, 10°C/min 263 / * °C ISO 11357-1/-3
Temp. of deflection under load, 1.80 MPa 60 / * °C ISO 75-1/-2
Temp. of deflection under load, 0.45 MPa 160 / * °C ISO 75-1/-2
Coeff. of linear therm. expansion, parallel 150 / * E-6/K ISO 11359-1/-2
Coeff. of linear therm. expansion, normal 130 / * E-6/K ISO 11359-1/-2
Burning Behav. at 1.5 mm nom. thickn. HB / * class IEC 60695-11-10
Thickness tested 1.5 / * mm IEC 60695-11-10
UL recognition UL / * - -
Burning Behav. at thickness h HB / * class IEC 60695-11-10
Thickness tested 3.0 / * mm IEC 60695-11-10
UL recognition UL / * - -
top
Electrical properties dry / cond Unit Test Standard
Relative permittivity, 100Hz 3.4 / 6 - IEC 60250
Relative permittivity, 1MHz 3.2 / 3.5 - IEC 60250
Dissipation factor, 100Hz 50 / 1800 E-4 IEC 60250
Dissipation factor, 1MHz 110 / 380 E-4 IEC 60250
Volume resistivity >1E13 / 2E10 Ohm*m IEC 60093
Surface resistivity * / >1E15 Ohm IEC 60093
Electric strength 26 / 26 kV/mm IEC 60243-1
Comparative tracking index 600 / - - IEC 60112
top
Other properties dry / cond Unit Test Standard
Humidity absorption 1.9 / * % Sim. to ISO 62
Density 1090 / - kg/m? ISO 1183
top
Film Properties dry / cond Unit Test Standard
Strain at yield, parallel 9.49 / * % ISO 527-3
top
Diagrams Tensile modulus-temperature , Zytel? ST801AW NC010, PA66-I, DuPont Tensile modulus-temperature , Zytel? ST801AW NC010, PA66-I, DuPont
top
Characteristics Processing Injection Molding Delivery form Pellets Additives Release agent Special Characteristics Light stabilized or stable to light, U.V. stabilized or stable to weather Regional Availability North America, Europe, Asia Pacific, South and Central America, Near East/Africa
top
Other text information Injection molding PREPROCESSING

Drying recommended = Yes, if moisture content of resin exceeds recommended level
Drying temperature = 80°C
Drying time, dehumidified dryer = 2-4 h
Processing moisture content = <0.2 %

PROCESSING

Melt temperature optimum = 290°C
Melt temperature range = 280-300°C
Mold temperature optimum = 70°C
Mold temperature range = 50-90°C
Maximum Screw tangential Speed : 0.3 m/s
Flow front speed : 150 mm/sHold pressure optimum : 85 MPa
Hold pressure range : 50-100 MPa
Back pressure : low
Hold pressure time : 3 s/mm
Maximum hold-up time : 10 min


Moulding guide
top
Chemical Media Resistance
Acids
Acetic Acid (5% by mass) (23°C)
Citric Acid solution (10% by mass) (23°C)
Lactic Acid (10% by mass) (23°C)
Hydrochloric Acid (36% by mass) (23°C)
Nitric Acid (40% by mass) (23°C)
Sulfuric Acid (38% by mass) (23°C)
Sulfuric Acid (5% by mass) (23°C)
Chromic Acid solution (40% by mass) (23°C)
Bases
Sodium Hydroxide solution (35% by mass) (23°C)
Sodium Hydroxide solution (1% by mass) (23°C)
Ammonium Hydroxide solution (10% by mass) (23°C)
Alcohols
Isopropyl alcohol (23°C)
Methanol (23°C)
Ethanol (23°C)
Hydrocarbons
n-Hexane (23°C)
Toluene (23°C)
iso-Octane (23°C)
Ketones
Acetone (23°C)
Ethers
Diethyl ether (23°C)
Mineral oils
SAE 10W40 multigrade motor oil (23°C)
SAE 10W40 multigrade motor oil (130°C)
SAE 80/90 hypoid-gear oil (130°C)
Insulating Oil (23°C)
Standard Fuels
ISO 1817 Liquid 1 (60°C)
ISO 1817 Liquid 2 (60°C)
ISO 1817 Liquid 3 (60°C)
ISO 1817 Liquid 4 (60°C)
Standard fuel without alcohol (pref. ISO 1817 Liquid C) (23°C)
Standard fuel with alcohol (pref. ISO 1817 Liquid 4) (23°C)
Diesel fuel (pref. ISO 1817 Liquid F) (23°C)
Diesel fuel (pref. ISO 1817 Liquid F) (90°C)
Diesel fuel (pref. ISO 1817 Liquid F) (>90°C)
Salt solutions
Sodium Chloride solution (10% by mass) (23°C)
Sodium Hypochlorite solution (10% by mass) (23°C)
Sodium Carbonate solution (20% by mass) (23°C)
Sodium Carbonate solution (2% by mass) (23°C)
Zinc Chloride solution (50% by mass) (23°C)
Other
Ethyl Acetate (23°C)
Hydrogen peroxide (23°C)
DOT No. 4 Brake fluid (130°C)
Ethylene Glycol (50% by mass) in water (108°C)
1% nonylphenoxy-polyethyleneoxy ethanol in water (23°C)
50% Oleic acid + 50% Olive Oil (23°C)
Water (23°C)
Deionized water (90°C)
Phenol solution (5% by mass) (23°C)
标签：
相关产品推荐