PA66塑胶粒Zytel101F

厂商 ：东莞市兰天塑化有限公司

广东 东莞
  • 主营产品：
  • TPEE
  • POM
  • PMMA
联系电话 ：13642878068
商品详细描述

CAMPUS? datasheet | Zytel? 101F NC010


This datasheet of Zytel? 101F NC010 from DuPont Engineering Polymers is provided by the international plastics database CAMPUS.

This datasheet includes:

Rheological properties - Mechanical properties - Thermal properties - Electrical properties - Other properties - Material specific properties - Film Properties - Rheological calculation properties - Diagrams
  Zytel? 101F NC010 | PA66 | DuPont Engineering Polymers
Product Texts
Common features of Zytel? nylon resin include mechanical and physical properties such as high mechanical strength, excellent balance of stiffness and toughness, good high temperature performance, good electrical and flammability properties, good abrasion and chemical resistance. In addition, Zytel? nylon resins are available in different modified and reinforced grades to create a wide range of products with tailored properties for specific processes and end-uses. Zytel? nylon resin, including most flame retardant grades, offer the ability to be coloured.

The good melt stability of Zytel? nylon resin normally enables the recycling of properly handled production waste. If recycling is not possible, DuPont recommends, as the preferred option, incineration with energy recovery (-31kJ/g of base polymer) in appropriately equipped installations. For disposal, local regulations have to be observed.

Zytel? nylon resin typically is used in demanding applications in the automotive, furniture, domestic appliances, sporting goods and construction industry.

Zytel? 101F is a lubricated polyamide 66 for injection molding. It is suitable for fast production cycles and high productivity applications.

Food compliance:

Not compliant for EU

Typical applications:

Precision parts with long flow paths or demanding geometry such as cable ties, connector, plugs, gears and bearings.
top
Rheological properties dry / cond Unit Test Standard
Molding shrinkage, parallel 1.4 / * % ISO 294-4, 2577
Molding shrinkage, normal 1.3 / * % ISO 294-4, 2577
top
Mechanical properties dry / cond Unit Test Standard
Tensile Modulus 3100 / 1500 MPa ISO 527-1/-2
Yield stress 82 / 53 MPa ISO 527-1/-2
Yield strain 4.5 / 25 % ISO 527-1/-2
Nominal strain at break 20 / >50 % ISO 527-1/-2
Tensile creep modulus, 1h * / 1300 MPa ISO 899-1
Tensile creep modulus, 1000h * / 750 MPa ISO 899-1
Charpy impact strength, +23°C N / N kJ/m? ISO 179/1eU
Charpy impact strength, -30°C 400 / N kJ/m? ISO 179/1eU
Charpy notched impact strength, +23°C 6 / 15 kJ/m? ISO 179/1eA
Charpy notched impact strength, -30°C 5 / 4 kJ/m? ISO 179/1eA
top
Thermal properties dry / cond Unit Test Standard
Melting temperature, 10°C/min 263 / * °C ISO 11357-1/-3
Glass transition temperature, 10°C/min 65 / * °C ISO 11357-1/-2
Temp. of deflection under load, 1.80 MPa 70 / * °C ISO 75-1/-2
Temp. of deflection under load, 0.45 MPa 200 / * °C ISO 75-1/-2
Vicat softening temperature, 50°C/h 50N 240 / * °C ISO 306
Coeff. of linear therm. expansion, parallel 100 / * E-6/K ISO 11359-1/-2
Coeff. of linear therm. expansion, normal 110 / * E-6/K ISO 11359-1/-2
Burning Behav. at 1.5 mm nom. thickn. V-2 / * class IEC 60695-11-10
Thickness tested 1.5 / * mm IEC 60695-11-10
UL recognition UL / * - -
Burning Behav. at thickness h V-2 / * class IEC 60695-11-10
Thickness tested 0.4 / * mm IEC 60695-11-10
UL recognition UL / * - -
Oxygen index 28 / * % ISO 4589-1/-2
top
Electrical properties dry / cond Unit Test Standard
Relative permittivity, 100Hz 3.8 / 6 - IEC 60250
Relative permittivity, 1MHz 3.5 / 4.6 - IEC 60250
Dissipation factor, 100Hz 140 / - E-4 IEC 60250
Dissipation factor, 1MHz 180 / 1000 E-4 IEC 60250
Volume resistivity 1E13 / 1E11 Ohm*m IEC 60093
Surface resistivity * / 1E12 Ohm IEC 60093
Electric strength 32 / 26 kV/mm IEC 60243-1
top
Other properties dry / cond Unit Test Standard
Water absorption 8.5 / * % Sim. to ISO 62
Humidity absorption 2.6 / * % Sim. to ISO 62
Density 1140 / - kg/m? ISO 1183
top
Material specific properties dry / cond Unit Test Standard
Viscosity number 140 / * cm?/g ISO 307, 1157, 1628
top
Film Properties dry / cond Unit Test Standard
Strain at yield, parallel 4.5 / * % ISO 527-3
top
Rheological calculation properties Value Unit Test Standard
Density of melt 970 kg/m? -
Thermal conductivity of melt 0.16 W/(m K) -
Spec. heat capacity of melt 2790 J/(kg K) -
Eff. thermal diffusivity 5E-8 m?/s -
Ejection temperature 190 °C -
top
Diagrams Viscosity-shear rate , Zytel? 101F NC010, PA66, DuPont Shearstress-shear rate , Zytel? 101F NC010, PA66, DuPont Dynamic Tensile modulus-temperature , Zytel? 101F NC010, PA66, DuPont Dynamic Tensile modulus-temperature , Zytel? 101F NC010, PA66, DuPont Stress-strain , Zytel? 101F NC010, PA66, DuPont Stress-strain , Zytel? 101F NC010, PA66, DuPont Secant modulus-strain , Zytel? 101F NC010, PA66, DuPont Secant modulus-strain , Zytel? 101F NC010, PA66, DuPont LTHA-Stress at Break 4mm, Zytel? 101F NC010, PA66, DuPont LTHA-Strain at Break 4mm, Zytel? 101F NC010, PA66, DuPont LTHA-Charpy Impact Strength (23°C) 4mm, Zytel? 101F NC010, PA66, DuPont
top
Characteristics Processing Injection Molding Delivery form Pellets Additives Release agent Regional Availability North America, Europe, Asia Pacific, South and Central America, Near East/Africa
top
Other text information Injection molding PREPROCESSING

Drying recommended = Yes, if moisture content of resin exceeds recommended level
Drying temperature = 80°C
Drying time, dehumidified dryer = 2-4 h
Processing moisture content = <0.2 %

PROCESSING

Melt temperature optimum = 290°C
Melt temperature range = 280-300°C
Mold temperature optimum = 70°C
Mold temperature range = 50-90°C
Maximum Screw tangential Speed : 0.4 m/s
Flow front speed : 300 mm/sHold pressure optimum : 85 MPa
Hold pressure range : 50-100 MPa
Back pressure : low
Hold pressure time : 4 s/mm
Maximum hold-up time : 15 min


Moulding guide
top
Chemical Media Resistance
Acids
Acetic Acid (5% by mass) (23°C)
Citric Acid solution (10% by mass) (23°C)
Lactic Acid (10% by mass) (23°C)
Hydrochloric Acid (36% by mass) (23°C)
Nitric Acid (40% by mass) (23°C)
Sulfuric Acid (38% by mass) (23°C)
Sulfuric Acid (5% by mass) (23°C)
Chromic Acid solution (40% by mass) (23°C)
Bases
Sodium Hydroxide solution (35% by mass) (23°C)
Sodium Hydroxide solution (1% by mass) (23°C)
Ammonium Hydroxide solution (10% by mass) (23°C)
Alcohols
Isopropyl alcohol (23°C)
Methanol (23°C)
Ethanol (23°C)
Hydrocarbons
n-Hexane (23°C)
Toluene (23°C)
iso-Octane (23°C)
Ketones
Acetone (23°C)
Ethers
Diethyl ether (23°C)
Mineral oils
SAE 10W40 multigrade motor oil (23°C)
SAE 10W40 multigrade motor oil (130°C)
SAE 80/90 hypoid-gear oil (130°C)
Insulating Oil (23°C)
Standard Fuels
ISO 1817 Liquid 1 (60°C)
ISO 1817 Liquid 2 (60°C)
ISO 1817 Liquid 3 (60°C)
ISO 1817 Liquid 4 (60°C)
Standard fuel without alcohol (pref. ISO 1817 Liquid C) (23°C)
Standard fuel with alcohol (pref. ISO 1817 Liquid 4) (23°C)
Diesel fuel (pref. ISO 1817 Liquid F) (23°C)
Diesel fuel (pref. ISO 1817 Liquid F) (90°C)
Diesel fuel (pref. ISO 1817 Liquid F) (>90°C)
Salt solutions
Sodium Chloride solution (10% by mass) (23°C)
Sodium Hypochlorite solution (10% by mass) (23°C)
Sodium Carbonate solution (20% by mass) (23°C)
Sodium Carbonate solution (2% by mass) (23°C)
Zinc Chloride solution (50% by mass) (23°C)
Other
Ethyl Acetate (23°C)
Hydrogen peroxide (23°C)
DOT No. 4 Brake fluid (130°C)
Ethylene Glycol (50% by mass) in water (108°C)
1% nonylphenoxy-polyethyleneoxy ethanol in water (23°C)
50% Oleic acid + 50% Olive Oil (23°C)
Water (23°C)
Deionized water (90°C)
Phenol solution (5% by mass) (23°C)
标签：
相关产品推荐