厂商 :东莞市添卓精密机械有限公司(销售部)
广东 东莞- 主营产品:
- 钻咀研磨机
- 菲林底片贴膜机
- 菲林保护膜机
联系电话 :13600290225
商品详细描述
TZ-7300真空油墨过滤机
用途:
本机为间断型真空过滤设备,主要供高粘性油墨、冶金、食品、电子等系列科研实验单位,在发展高粘可选性实验工作中,作业粘稠泥质浆过滤之用,进行固液分离时使用。
真空油墨过滤机技术参数:
1、滤盘Φ220mm,小盘Φ150mm。
2、滤盘容量:大盘容量2升,小盘容量2升。
3、油墨粘度:600CP左右
4、油墨粒度:80-120目
5、过滤样品重量:大盘重不超过1000克,小盘重不超过1000克。
6、过滤时间:一般是5-10分钟
7、真空度:不低于20KPa
8、电源:AC:220V、频率:50/HZ
9、功率:不大于0.6KW
10、规格:长550mm*宽550mm*高1120mm
11、总重量:约47KG
TZ-7300 vacuum ink filter
Purpose:
This machine is intermittent vacuum filter equipment, and it is mainly for the scientific research and experiment units of high-viscosity ink, metallurgy, food and electronics etc.It is for filtering the operation viscous mud slurry in the experiment work of developing high-viscosity options, and it is used when separating the solid from the liquid.
Technical parameters of vacuum ink filter:
1. Filter disk Φ220mm, small disk Φ150mm.
2. Volume of the filter disk: Big disk volume 2L, small disk volume 2L.
3. Ink viscosity: Around 600CP
4. Ink particle size: 80-120 meshes
5. Weight of the filter sample: Big disk weight not more than 1,000g, small disk weight not more than 1,000g.
6. Filter time: Generally 5-10 minutes
7. Vacuum degree: Not lower than 20KPa
8. Power supply: AC: 220V, frequency: 50/HZ
9. Power: Not more than 0.6KW
10. Specification: Length 550mm* width 550mm* height 1120mm
11. Total weight: About 47KG
用途:
本机为间断型真空过滤设备,主要供高粘性油墨、冶金、食品、电子等系列科研实验单位,在发展高粘可选性实验工作中,作业粘稠泥质浆过滤之用,进行固液分离时使用。
真空油墨过滤机技术参数:
1、滤盘Φ220mm,小盘Φ150mm。
2、滤盘容量:大盘容量2升,小盘容量2升。
3、油墨粘度:600CP左右
4、油墨粒度:80-120目
5、过滤样品重量:大盘重不超过1000克,小盘重不超过1000克。
6、过滤时间:一般是5-10分钟
7、真空度:不低于20KPa
8、电源:AC:220V、频率:50/HZ
9、功率:不大于0.6KW
10、规格:长550mm*宽550mm*高1120mm
11、总重量:约47KG
TZ-7300 vacuum ink filter
Purpose:
This machine is intermittent vacuum filter equipment, and it is mainly for the scientific research and experiment units of high-viscosity ink, metallurgy, food and electronics etc.It is for filtering the operation viscous mud slurry in the experiment work of developing high-viscosity options, and it is used when separating the solid from the liquid.
Technical parameters of vacuum ink filter:
1. Filter disk Φ220mm, small disk Φ150mm.
2. Volume of the filter disk: Big disk volume 2L, small disk volume 2L.
3. Ink viscosity: Around 600CP
4. Ink particle size: 80-120 meshes
5. Weight of the filter sample: Big disk weight not more than 1,000g, small disk weight not more than 1,000g.
6. Filter time: Generally 5-10 minutes
7. Vacuum degree: Not lower than 20KPa
8. Power supply: AC: 220V, frequency: 50/HZ
9. Power: Not more than 0.6KW
10. Specification: Length 550mm* width 550mm* height 1120mm
11. Total weight: About 47KG
相关产品推荐