CEDAR日本思达东莞数显扭力扳手

厂商 ：东莞市格瑞仪器有限公司

广东 东莞
  • 主营产品：
  • 量具量仪
  • 磨具磨料
  • 砂布
联系电话 ：15011660827
商品详细描述
CEDAR日本思达东莞数显扭力扳手

产品特点

It is compactly about a detection part.
To management of bolting of a screw bolt.
Bolting measurement of screw and bolt
● TORQUE CHECKER 　
DI-5M series
Separate type merit!
Detection part is compact.

 DI-5M-RL02
To measurement of the minute torque of 200 or less mN-m

Since the detection part was small and a light weight, minute torque measurement which needs prudence for handling was enabled.



 DI-5M-RL2
Measurement to 2N?m

It is easy to use measuring range widely.
DI-5M-RL6
Measurement to 6 N?m

 DI-5M-TW15
Torque measurement of a narrow place was also attained.

The maximum capacity   15 N-m
The minimum scale   0.01 N-m

(in addition -- Peak-Peak mode -- 0.15 N-m)

 DI-5M-TW20
To the measurement of high torque to 20 N-m


 
NEW FUNCTIONS
(1) Preinstall "Real-time Output Mode" Which Outputs Load Torque Every [ about 1 / 80] Seconds. A graph can be written with a personal computer.

(2)Display, Preservation, and Output about Maximum, Minimum, and Average of Measured Value.
The main functions　(DI-5M series) 
- A maximum and minimum set torque O.K.!
 Setting value is told with a buzzer and an LED lamp.
- A data memory is 300.
Data can carry out personal computer management with a RS232C output.
- It is a rechargeable battery drive and is convenience!
Furthermore, it is safe operation at auto-power-off.　
- Tighting Counter!
The number of screw bundle is counted. Forgetting can be prevented.

性能参数 尺寸图 相关附件 　
 
Specification
 DI-5M-RL02
 DI-5M-RL2
 DI-5M-RL6
 DI-5M-TW15
 DI-5M-TW20
Measuring range
 1.5～200mN?m
0.015～2kgf?cm
0.015～1.8lbf?in
 0.015～2N?m
0.15～20 kgf?cm
0.15～18lbf?in
 0.15～6N?m
1.5～60kgf?cm
1.5～54lbf?in
 0.15～15 N?m
1.5～150 kgf?cm
1.5～130 lbf?in
 0.15～20N?m
1.5～200kgf?cm
1.5～180lbf?in
Accuracy
 ±0.5% (or less 199±1digit)
Display
 The 3.5 figures digital display of LCD
The measurement direction
 CW-CCW (right and left)
Measuring
mode
 P-P  Peak
 Peak load value hold.
T-R  Track
 Indication of real time torque value.
P-D  Peak down
 Holding Load Value at the moment to change from upward to downword
C Real-time output
 Load torque value is outputted every about1/ 80 second by RS232C.
Decision
function
 Setting of torque value
 A top and a minimum value are in a measuring range, and a setup is possible.
Can confirm the set value by the buzzer sound or LED.
The Maximum, the minimum, and the average value
 Displays, memory and output the data number, the maximum, the minimum, and the average value of the measured value to 30 data. It can save by a maximum of 10 channels.
clearance
 It is a display clearance in set-up time.   (0.5 - 3.0 sec)
One-touch zero
 A clear button is pushed and it is a zero. data output.
A setup of the number of counts
 One to 99 count   (count in a direction with a bundle)
Data spec.
 Data transfer
 Serial interface RS232C (Baud rate : 9600)
Data memory
 300 data stored
Power supply
 Ni-Cd chargeable battery 1.2V×4cells 　450mAh
Auto power save
 10 minutes no use, automatically switch off.
Charging time
 From empty - less than 4hours
Continues working time
 10 hours
Meter outside type dimension
 64(W) x104(D) x25 (H)  (It does not contain by the projection thing.)
Weight
Meter part    208g
Bit/Socket part
 Φ4
 HEX 6.35
 □　6.35
□　9.5
Accessories
 (one piece each)
 Φ4 bits
(＋)　?0/?1
 6.35HEX bits
(＋)　?1/?2
 One-way socket
Receipt case
AC/DC adaptor (Please choose AC adaptor out of 120V, and 230V.)
An inspection report, a proofreading certificate, a traceability system figure
* TW15 models of roller clutches are used.
The one-way mechanism with sufficient efficiency with a return angle of 0 degree is attached. 　(at the time of a right-hand-thread bundle)

CEDAR日本思达东莞数显扭力扳手
标签：
相关产品推荐