厂商 ：杜邦粤莞塑胶原料有限公司
广东 东莞- 主营产品：
- POM
- PMMA
- PC/ABS
联系电话 ：13694959911
商品详细描述
CAMPUS? datasheet | Zytel? 70G33L NC010
This datasheet of Zytel? 70G33L NC010 from DuPont Engineering Polymers is provided by the international plastics database CAMPUS.
Zytel? 70G33L NC010 | PA66-GF33 | DuPont Engineering Polymers
材料文字说明
Common features of Zytel? nylon resin include mechanical and physical properties such as high mechanical strength, excellent balance of stiffness and toughness, good high temperature performance, good electrical and flammability properties, good abrasion and chemical resistance. In addition, Zytel? nylon resins are available in different modified and reinforced grades to create a wide range of products with tailored properties for specific processes and end-uses. Zytel? nylon resin, including most flame retardant grades, offer the ability to be coloured.
The good melt stability of Zytel? nylon resin normally enables the recycling of properly handled production waste. If recycling is not possible, DuPont recommends, as the preferred option, incineration with energy recovery (-31kJ/g of base polymer) in appropriately equipped installations. For disposal, local regulations have to be observed.
Zytel? nylon resin typically is used in demanding applications in the automotive, furniture, domestic appliances, sporting goods and construction industry.
Zytel? 70G33L is a 33% glass fibre reinforced, lubricated polyamide 66 for injection molding.
The good melt stability of Zytel? nylon resin normally enables the recycling of properly handled production waste. If recycling is not possible, DuPont recommends, as the preferred option, incineration with energy recovery (-31kJ/g of base polymer) in appropriately equipped installations. For disposal, local regulations have to be observed.
Zytel? nylon resin typically is used in demanding applications in the automotive, furniture, domestic appliances, sporting goods and construction industry.
Zytel? 70G33L is a 33% glass fibre reinforced, lubricated polyamide 66 for injection molding.
| 流变性能 | 干 / 已调节 | 单位 | 测试标准 |
| 模塑收缩率, 平行 | 0.3 / * | % | ISO 294-4, 2577 |
| 模塑收缩率, 垂直 | 1.1 / * | % | ISO 294-4, 2577 |
| 机械性能 | 干 / 已调节 | 单位 | 测试标准 |
| 拉伸模量 | 10500 / 8000 | MPa | ISO 527-1/-2 |
| 断裂应力 | 200 / 140 | MPa | ISO 527-1/-2 |
| 断裂伸长率 | 3.5 / 5 | % | ISO 527-1/-2 |
| 拉伸蠕变模量, 1h | * / 8000 | MPa | ISO 899-1 |
| 拉伸蠕变模量, 1000h | * / 5500 | MPa | ISO 899-1 |
| 无缺口简支梁冲击强度, +23°C | 85 / 100 | kJ/m? | ISO 179/1eU |
| 无缺口简支梁冲击强度, -30°C | 70 / 75 | kJ/m? | ISO 179/1eU |
| 简支梁缺口冲击强度, +23°C | 13 / 17 | kJ/m? | ISO 179/1eA |
| 简支梁缺口冲击强度, -30°C | 10 / 10 | kJ/m? | ISO 179/1eA |
| 热性能 | 干 / 已调节 | 单位 | 测试标准 |
| 熔融温度, 10°C/min | 262 / * | °C | ISO 11357-1/-3 |
| 玻璃化转变温度, 10°C/min | 80 / * | °C | ISO 11357-1/-2 |
| 热变形温度, 1.80 MPa | 249 / * | °C | ISO 75-1/-2 |
| 热变形温度, 0.45 MPa | 261 / * | °C | ISO 75-1/-2 |
| 线性热膨胀系数, 平行 | 18 / * | E-6/K | ISO 11359-1/-2 |
| 线性热膨胀系数, 垂直 | 85 / * | E-6/K | ISO 11359-1/-2 |
| 燃烧性－氧指数 | 24 / * | % | ISO 4589-1/-2 |
| 电性能 | 干 / 已调节 | 单位 | 测试标准 |
| 介质损耗因子, 100Hz | 150 / - | E-4 | IEC 60250 |
| 介质损耗因子, 1MHz | 150 / - | E-4 | IEC 60250 |
| 体积电阻率 | 1E13 / - | Ohm*m | IEC 60093 |
| 相对漏电起痕指数 | 600 / - | - | IEC 60112 |
| 其它性能 | 干 / 已调节 | 单位 | 测试标准 |
| 吸水性 | 5.7 / * | % | 类似ISO 62 |
| 吸湿性 | 1.8 / * | % | 类似ISO 62 |
| 密度 | 1390 / - | kg/m? | ISO 1183 |
| 流变计算用参数 | 价值 | 单位 | 测试标准 |
| 熔体 | 0.22 | W/(m K) | - |
函数
典型数据
加工方法
注塑
供货形式
粒料
添加剂
润滑剂, 脱模助剂
地区供应
北美, 欧洲, 亚太, 中南美洲, 中东/非洲
耐化学性
| 酸类 | |
 |
醋酸 (5g/100g) (23°C) |
|
柠檬酸溶液 (10g/100g) (23°C) |
|
乳酸 (10g/100g) (23°C) |
 |
盐酸 (36g/100g) (23°C) |
|
硝酸 (40g/100g) (23°C) |
|
硫酸 (38g/100g) (23°C) |
|
硫酸 (5g/100g) (23°C) |
|
铬酸溶液 (40g/100g) (23°C) |
| 碱类 | |
|
氢氧化钠溶液 (35g/100g) (23°C) |
|
氢氧化钠溶液 (1g/100g) (23°C) |
|
氨水(氢氧化铵) (10g/100g) (23°C) |
| 醇类 | |
|
异丙醇 (23°C) |
|
甲醇 (23°C) |
|
乙醇 (23°C) |
| 碳氢化合物 | |
|
正乙烷 (23°C) |
|
甲苯 (23°C) |
|
异辛烷 (23°C) |
| 酮类 | |
|
丙酮 (23°C) |
| 醚类 | |
|
(二)乙醚 (23°C) |
| 矿物油 | |
|
SAE 10W40号多效润滑油 (23°C) |
|
SAE 10W40号多效润滑油 (130°C) |
|
SAE 89/90号变速箱润滑油 (130°C) |
|
绝缘油 (23°C) |
| 标准燃油 | |
|
ISO 1817 燃油1号 (60°C) |
|
ISO 1817 燃油2号 (60°C) |
|
ISO 1817 燃油3号 (60°C) |
|
ISO 1817 燃油4号 (60°C) |
|
不含酒精的标准燃油(优先使用C类ISO 1817 燃油) (23°C) |
|
含酒精的标准燃油(优先使用4号ISO 1817 燃油) (23°C) |
|
柴油(优先使用F类ISO 1817液体) (23°C) |
|
柴油(优先使用F类ISO 1817液体) (90°C) |
|
柴油(优先使用F类ISO 1817液体) (>90°C) |
| 盐溶液 | |
|
氯化钠溶液(10g/100g) (23°C) |
|
次氯化钠溶液 (10g/100g) (23°C) |
|
碳酸钠溶液 (20g/100g) (23°C) |
|
碳酸钠溶液 (2g/100g) (23°C) |
|
氯化锌溶液 (50g/100g) (23°C) |
| 其它 | |
|
乙酸乙酯 (23°C) |
|
过氧化氢 (23°C) |
|
DOT4号刹车油 (130°C) |
|
乙二醇水溶液 (50g/100g) (108°C) |
|
1g/100g 基苯氧- 聚环氧乙烷乙烯水溶液 (23°C) |
|
油酸 (50g/100g) + 橄榄油 (50g/100g) (23°C) |
|
水 (23°C) |
|
去离子水 (90°C) |
|
酚溶液(5g/100g) (23°C) |
相关产品推荐
