1.0 INPUT

 

     1.1 Voltage

 

Minimum	Normal	Maximum	Unit
100	115/230	240	Vrms

 

1.2 Frequency

  47Hz~63Hz
 

1.3 Current

2A.(MAX)
 

1.4 Inrush current

 
115V/40A(max.), 230V/80A(max.)
at 25℃ at cold start.
 

     1.5  Power efficiency

80% (min.) at full load, 110Vac or 230Vac 50Hz.
 
 

2.0 OUTPUT

 

2.1  Charge curve

Charger current(mA)

Voltage(V)

 
 
 

CV

CC

                                           

4000

T

12．6V

 
 
 
 
 
 

            current
               Voltage
 
2.1.1   Its output voltage is 12.6+/-1%V at standby.
 
     2.2  Led display
         Green on standby
Red on charging
Green on full charge when charging current drop to 400+/-15mA.

 

 
 
 

3.0 PROTECTION

 

3.1 Over voltage protection

Output  over voltage protection with zener diode.
 

3.2 Short circuit protection

The output short to ground, it will auto-recovery without damage.

 

 3.3 Output reverse input  protection

       When output reverse input,the unit and the battery will be no damage.
 

 

4.0 HI-POT

   4.1 HI-POT

       4.1.1 P~S:3300Vac 2S,the leakage current will be lower than 10mA.
 
     

5.0 ENVIRONMENT:

 5.1 Ambient operation temperature

  0℃ to  +40℃

 5.2 Ambient operation relative humidity

     20%  to  85%

 5.3 Ambient storage temperature

 -40℃ to +70℃

 5.4 Ambient storage relative humidity

     10%  to  95%

 

6.0 SAFETY:

6.1    UL1310
6.2    CE
6.2.1 EN60335-2-29
6.2.2 EN60335-1
 
7.0 EMC:
7.1 FCC part15
7.2 EN55022 classB
7.3 EN55014-1/2
7.4 EN50366
7.5 EN61000-3-2
7.6 EN61000-3-3
 

8.0 DROP TEST

     

8.1 Freely drop the wooden board from the height of 75cm

               for two times per side(front/back/left/right).

 

9.0 VIBRATION TEST

     

9.1 Vibration frequency:5-60-5Hz with 10 octave/min@2.1G
9.2 Three circles per axis(X,Y,Z) for 10minutes

 

10.0 MTBF

30,000 hours base on  bellcore  TR332 document  required  at 25℃.
           
 

11.0 Outline

11.1.Outline dimension: 135.5L X 65.5W X 37(H) mm MAX;