厂商 ：新乡市振动设备制造股份有限公司
河南 新乡- 主营产品：
- 给料机 活化料斗
- 直线振动筛
- 法兰成型机及配件
联系电话 ：15837359001
商品详细描述
LZF型仓壁振动器（防闭塞装置）
LZF SILO WALL VIBRATOR
应用范围 Applications
仓壁振动又称为振动防闭塞装置，用来使料仓、料斗漏料段的倾斜壁高频振动，以防止仓（斗）内的物料起拱、管状通道仓壁粘料等不流畅现象，保证物料从料仓（斗）中顺畅流出。仓壁振动器由于具有结构简单、防堵塞能力强、能耗低、寿命长、激振力可调等优点，目前已广泛应用于煤炭、冶金、耐火材料、食品、化工、发电、港口和铁路运输等行业。
Silo wall vibrator is a kind of blocking-proof device which can be used to prevent and dispel material arching and blocking in silo by vibrating the inclined wall in high frequency，so as to ensure the material flow out from silo easily.Due to the simple structure，good blocking-proof ability，energy-saving，long lifetime，adjustable force，etc，LZF silo wall vibrator is widely used in coal，metallurgy，fireproof material，food，chemical industry，electric power，port and railway transport，etc.
安装 Installation
LZF型仓壁振动器可以直接焊接在全钢板料仓的仓壁上。安装位置为出料扣向上锥形高度的1/4至1/3处。
每台LZF型仓壁振动器的振动力传递范围为4㎡左右（注意把振动力衰减考虑在内），用户可根据料仓的大小确定每个料仓应安装的台数。
如果将两台LZF型仓壁振动器对称安装在仓壁的两个侧面上时，安装位置应上下错开100mm以上，以免互相干扰。
钢制料仓使用仓壁振动器时，应在外壁加设振动板，再将仓壁振动器焊牢在振动板上，振动板的厚度视料仓结构容积而定。
振动电机的电缆线也参与振动，电缆从振动电机的引出点至电缆固定支架间的距离应保持500-1000mm.
LZF silo wall vibrator can be welded on the steel silo wall directly at the position higher than outlet 1/4~1/3cone height.
LZF silo wall vibrator can transmit force within range of 4m2（Please note that the attenuation must be considered）；Users can decide how many vibrators should be installed according to the dimension of the silo.
If two LZF silo wall vibrators are installed symmetrically on two sides of silo，they must be staggered and keep a distance of 100mm vertically，so as to avoid disturbance between each other.
If the silo wall is made of steel，there must be a board added on the outside wall and then weld the vibrator on the board.The thickness of the board depends on the structure and capacity of the silo.
Since the cable will vibrate with the vibrator，and must keep a distance of 500~1000mm between the cable outlet and the cable fixed support.
操作与维修Maintenance
振动电机运转初期，由于螺栓、螺母与底座平面间的磨合，会降低紧固力，出现小的松动，故运转初期应将振动电机的底脚螺栓多次拧紧，开始时每天至少紧固一次，两周后每周检查紧固。必须严格使用说明书操作。
At the beginning of the running，the bolts and the nuts may loose due to the seating time，so must check and tighten them several times，in the first two weeks tighten daily，then check and tighten weekly.Operations must strictly follow the operational manual.
LZF SILO WALL VIBRATOR
应用范围 Applications
仓壁振动又称为振动防闭塞装置，用来使料仓、料斗漏料段的倾斜壁高频振动，以防止仓（斗）内的物料起拱、管状通道仓壁粘料等不流畅现象，保证物料从料仓（斗）中顺畅流出。仓壁振动器由于具有结构简单、防堵塞能力强、能耗低、寿命长、激振力可调等优点，目前已广泛应用于煤炭、冶金、耐火材料、食品、化工、发电、港口和铁路运输等行业。
Silo wall vibrator is a kind of blocking-proof device which can be used to prevent and dispel material arching and blocking in silo by vibrating the inclined wall in high frequency，so as to ensure the material flow out from silo easily.Due to the simple structure，good blocking-proof ability，energy-saving，long lifetime，adjustable force，etc，LZF silo wall vibrator is widely used in coal，metallurgy，fireproof material，food，chemical industry，electric power，port and railway transport，etc.
安装 Installation
LZF型仓壁振动器可以直接焊接在全钢板料仓的仓壁上。安装位置为出料扣向上锥形高度的1/4至1/3处。
每台LZF型仓壁振动器的振动力传递范围为4㎡左右（注意把振动力衰减考虑在内），用户可根据料仓的大小确定每个料仓应安装的台数。
如果将两台LZF型仓壁振动器对称安装在仓壁的两个侧面上时，安装位置应上下错开100mm以上，以免互相干扰。
钢制料仓使用仓壁振动器时，应在外壁加设振动板，再将仓壁振动器焊牢在振动板上，振动板的厚度视料仓结构容积而定。
振动电机的电缆线也参与振动，电缆从振动电机的引出点至电缆固定支架间的距离应保持500-1000mm.
LZF silo wall vibrator can be welded on the steel silo wall directly at the position higher than outlet 1/4~1/3cone height.
LZF silo wall vibrator can transmit force within range of 4m2（Please note that the attenuation must be considered）；Users can decide how many vibrators should be installed according to the dimension of the silo.
If two LZF silo wall vibrators are installed symmetrically on two sides of silo，they must be staggered and keep a distance of 100mm vertically，so as to avoid disturbance between each other.
If the silo wall is made of steel，there must be a board added on the outside wall and then weld the vibrator on the board.The thickness of the board depends on the structure and capacity of the silo.
Since the cable will vibrate with the vibrator，and must keep a distance of 500~1000mm between the cable outlet and the cable fixed support.
操作与维修Maintenance
振动电机运转初期，由于螺栓、螺母与底座平面间的磨合，会降低紧固力，出现小的松动，故运转初期应将振动电机的底脚螺栓多次拧紧，开始时每天至少紧固一次，两周后每周检查紧固。必须严格使用说明书操作。
At the beginning of the running，the bolts and the nuts may loose due to the seating time，so must check and tighten them several times，in the first two weeks tighten daily，then check and tighten weekly.Operations must strictly follow the operational manual.
相关产品推荐
