厂商 ：无锡晴川机床有限公司总部
江苏 无锡- 主营产品：
- 韩国斗山数控机床
- 数控龙门铣床加工中心
- 德玛吉DMG数控机床
联系电话 ：15365228369
商品详细描述
供应程泰数控车床GTS100
详细介绍
Designed for simultaneous turning of two work pieces within one machine setup. The GAS series incorporates twin-opposing spindles and turrets with Coaxes and live tooling capabilities. This configuration allows both turrets to work simultaneously with one turret at each spindle achieving ultimate efficiency.
Designed for simultaneous turning of two work pieces within one machine setup. The GAS series incorporates twin-opposing spindles and turrets with Coaxes and live tooling capabilities. This configuration allows both turrets to work simultaneously with one turret at each spindle achieving ultimate efficiency. | Models |
GTS-100
|
GTS-150
|
||
| Max. Turning Diameter | 7.08" (180mm) | |||
| Max. Turning Length | 7.08" (180mm) | |||
| Max. Swing Over Cover | 7.08" (180mm) | |||
| Spindles | Head1 | Head2 | Head1 | Head2 |
| Bar Capacity | 1.33" (34mm) | 1.65" (42mm) | 1.33" (34mm) | |
| Spindle Speed Range | 60~6000RPM | |||
| Spindle Drive System | Direct Drive1:1 Pulleys | |||
| Spindle Motor (Max Rating) | 10 HP AC (5.5./7.5Kw) | |||
| Hole Through Spindle | 20.07" (51mm) | |||
| Spindle Bearing Diameter | 2.95" (75mm) | |||
| Spindle Nose | 108mm Diameter Flat | |||
| Head 2 Slide Travel | 19.68" (500mm) | |||
| Turrets | 12 Station X 2 | |||
| Turret Index Time | 0.2 Sec./Pos. | |||
| Live Tooling Stations* | 6 Station | |||
| Live Tooling Drive Motor* | 5 HP AC (2.2/3.7Kw) | |||
| Live tooling RPM | Axial 4500rpm | Radial 6000rpm | ||
| X1/X2 Rapid Traverse Rate | 6.10" (155mm) | |||
| Z1 Max. Slide Travel | 7.28" (185mm) | |||
| Z2 Max. Slide Travel | 7.78" (200mm) | |||
| X1/X2 Rapid Traverse Rate | 590IPM (15m/min.) | |||
| Z1/Z2 Rapid Traverse Rate | 1,417IPM (36m/min.) | |||
| X-Axes Servo Drive Motors | 1.4 HP AC Absolute (1.0Kw) | |||
| Z-Axes Servo Drive Motors | 1.8 HP AC Absolute (1.4Kw) | |||
| Slide Way Type(All Axes) | Linear | |||
| Tool Size Square | 3/4" (20mm) | |||
| Tool Size Round | 1" Diameter (25mm Diameter) | |||
| Live Tooling Shaft Diameter* | 0.51" (13mm/ER 20) | |||
| Part Catcher Capacity* D X L | 1.65 x 5.11" (42 x 130mm) | |||
| CNC Control | Fanuc 18-T / Siemens 840D * | |||
| Voltage | AC 200/220 + 10% to 15% 3 Phase | |||
| Hydraulic Tank Capacity | 13 Gal. (50L) | |||
| Coolant Tank Capacity | 37 Gal. (140L) | |||
| Coolant Pumps | 1/2 HP Grundfos Ch-2/30 x 2 (55 PSI / 3.8 Bars) | |||
| Machine Dimensions LxWxH | 97" x 67" x 71" (3410 x 1700 x 1805 mm) | |||
| Approx. Machine Weight | 12,100 Lbs. (5500Kg) | |||
| *Optional | * 規格如有變更, 恕不另行通知 | |||
相关产品推荐
