汽水分离器AS

订货须知

1. 客户订货时应注明型号、公称通径或英寸、公称压力或磅级、连接形式、结构长度及其他参数。
2. 法兰连接：按JB/T79.1、GB9113.13.25SFUW、HG20592-97，如需其他标准的法兰（ANSI、DIN、BS、SH、JD等标准）应须注明。
3. 螺纹及承插焊连接：螺纹采用英制55度圆锥管内螺纹、国际Rc（ZR），如需其他标准（NPT、BSPT、PT）应需注明。

承插焊接JB1751-75S标准，如需其他标准应注明及两端部位尺寸。
二、性能范围：应注明最高工作压力PMO；最高工作温度TMO；最大凝结水排量QHMA（Kg/h）；和蒸汽设备的工艺要求特点。以选型适应性能特点。
三、产品设计制造按照JB/9093-2005《蒸汽疏水阀技术条件》（ZBJ16007-90）标准执行，产品质量分等按JB/TQ411-89执行。
四、用户如有特殊非标准要求的产品，本厂可承制其它型号及非标疏水阀、空气阀、汽水分离器及以国代进产品。
Order note

1. When making order,the customer should clearly indicate the type,nominal diameter or inch,nominal pressure or scale,connection mode,length and other parameters.
2. Connection by flange:we provide such types as JB/T79.1,GB113.25SFUW,HG20592-97;if there are other needs (type ANSI,DIN,BS,SH,and JD),please clearly indicate your request.
3. Connection by screw and welding:the screw asopred in accordance with 550 taper screw,and Rc(ZG),if there are other needs (NPT,BSPT and PT),please clearly indicate your request.

Welding standard of JB1751-75S;if you have other request,please clearly indicate the size of both parts.

1. Performances:please indicate that the largest working pressure if PMO,the largest working remoerature is TMO,the largest amount of water discharged is QHMA(Kg/h) and the.
2. The design and production of the conducted according to the stangdard of JB/9093-2005(Techniques of Steam Trap)and the quality of the product in compliance with JB/TQ411-89.
3. If you have other special request on the products,we can also provide reap,gas valves,as well as water and steam separator in other type and imported ones.

Size 规格	Desgin pressure(MPa) 设计压力	Extermal dimensions(mm)外型尺寸										Weight（Kg） 重量	Voulume（L） 容量
		A	B	C	D	E	F	G	H	I	J
DN65	1.6	420	250	640	219	160	1”	3/4”	100	265	30	46.5	18
	2.5	420	250	640	219	160	1”	3/4”	100	265	30	49	18
DN80	1.6	525	330	735	273	145	2”	3/4”	125	370	30	80	33
	2.5	525	330	735	273	145	2”	3/4”	125	370	30	88	33
DN100	1.6	575	335	795	324	165	2”	3/4”	125	385	40	98	50
	2.5	575	335	795	324	165	2”	3/4”	125	385	40	106	50
DN125	1.6	656	312	845	356	230	2”	3/4”	150	415	44	115	67
	3.0	656	312	845	356	230	2”	3/4”	150	415	44	134	67
DN150	1.6	706	345	935	406	245	2”	3/4”	150	465	60	154	96
	3.0	706	345	935	406	245	2”	3/4”	150	465	60	172	96
DN200	0.6	850	465	1200	500	375	2”	2”	175	560	60	275	185
	1.6	850	465	1200	500	375	2”	2”	175	560	60	280	185
	3.0	858	460	1200	508	375	2”	2”	175	565	60	280	230
DN250	0.6	950	615	1580	600	532	2”	2”	175	685	72	475	335
	1.6	950	615	1580	600	532	2”	2”	175	685	72	475	335
	3.0	960	615	1580	610	532	2”	2”	175	695	72	475	333
DN300	0.6	1000	740	1700	600	542	2”	2”	200	685	72	500	330
	1.6	1000	740	1700	600	542	2”	2”	200	685	72	500	330
	3.0	1010	740	1700	610	542	2”	2”	200	695	72	500	330
DN350	0.6/1.6/3.0	1100	755	1800	700	526	2”	2”	200	815	108	550	535