CFL510F电缆故障测试仪

厂商 :深圳市沃霖电子有限公司

广东 深圳市
  • 主营产品:
  • 风速计
  • 转速表
  • 示波器
联系电话 :18929369616
商品详细描述
Megger CFL510F电缆故障测试仪 特点:
Megger CFL510F  Hand-held Time Domain Reflectometer
New - Factory Warranty
  • 6 ranges for testing power, cellular, CATV, and telephone cables
  • Large high resolution backlit LCD
  • 25 , 50 , 75 , and 100 output impedance
  • Gain, balance, and contrast controls front panel accessible
  • FastFind automatic event locator
 
Megger CFL510F电缆故障测试仪 简介:
The MEGGGER CFL510F is an advanced instrument capable of identifying a wide range of cable faults using Time Domain Reflectometry. It offers exceptional features and a range capability normally associated with larger, more expensive instruments. The measurement range spans from 30 feet to9,000 feet, with a minimum resolution of four inches.
The Model CFL510F can be used on any cable consisting of at least two insulated metallic elements, one of which may be the sheath or shield of the cable. The CFL510F has internal matching networks to allow testing of 25-, 50-, 75-, and 100- cables. (These correspond to power, cellular, CATV, and telephone cable). The FastFind key simplifies waveform interpretation by automatically adjusting the instruments range and gain and places the measurement cursor at the major event on the cable.
The instrument can be closely matched to the cable using the balance control allowing long lengths of cable to be easily tested and faults close to the instrument accurately measured. The propagation velocity value can be similarly adjusted to match the cable; thus ensuring an ac-curate distance measurement. To en-able a wider range of faults to be detected, the gain of the instrument is also adjustable which helps the user identify minor faults over the entire cable length.
Other user adjustable settings include changing the distance measurement units between meters and feet and adjusting the propagation velocity units between a ratio and meters per micro-second. Display contrast can be set to compensate for all viewing conditions and a back lit LCD assists in low ambient light conditions.
The CFL510F is housed in a rugged ABS enclosure which is dust and weatherproof to IP54. The unit also comes complete with a carrying case containing lead storage, belt clip, and shoulder straps. It is powered by manganese-alkali, nickel-cadmium or nickel-metal-hydride batteries. The batteries are stored in a compartment on the back of the TDR, secured by two screws, and held in a carrier. This not only contains them securely but also allows for a quick change of re-chargeable battery packs.
 
Megger CFL510F手携式通讯电缆故障定位仪-产品简介:

#--先进的远距离电力、通讯电缆故障定位仪,该仪器采用TDR(时间域反射)技术,通过检测电缆导体的反射脉冲以确定电缆故障点的距离和位置
#--用于任何有两层以上金属绝缘层的电缆,绝缘层可以是铠装或屏蔽层
#--内置匹配网络,适于检测(25、50、75、100)欧姆阻抗的电缆(电力电缆,同轴电缆和数据/通讯电缆)
#--该仪器具有平衡控制功能,远距离的电缆故障也容易探测到,正确的故障距离可以从仪器上直接读出,调节该仪器的信号捕捉设置,可以探测到更远距离的故障及确认更多的小故障
#--操作简单,价格低,功能强,可以定位3Km远的电缆故障

Megger CFL510F手携式通讯电缆故障定位仪  产品特征:

#--六种测量范围(10-3000m)10m,30m,100m,300m,1000m,3000m
#--分辨率达到0.1m,可测试电力、CATV和电话线等通讯电缆
#--高分辨率背光液晶显示
#--25Ω,50Ω,75Ω,100Ω,输出阻抗
#--前面板调整增益、平衡和对比度
#--自动调节光标的量程以达到最佳视觉效果
#--清零功能可以增加近处电缆故障定位并可更有效的查找长电缆故障

Megger CFL510F手携式通讯电缆故障定位仪 产品应用:

#--电力、通讯电缆,同轴电缆,数据电缆故障点的距离和位置
#--显示电缆长度

Megger CFL510F手携式通讯电缆故障定位仪  技术指标:

#--量程:10m,30m,100m,300m,1000m,3000m
#--精度:0.67VF时,±1%量程
#--分辨率:1%量程
相关产品推荐