厂商 ：烟台未来自动装备有限责任公司(原烟台气动元件厂)
山东 烟台- 主营产品：
- 颗粒包装机
- 阀口袋包装机
- 输送机
联系电话 ：13688671856
商品详细描述
CD1000-X吨袋自动包装机
系统说明
该包装机是根据非金属矿粉、化工原料等粉体和颗粒物料而设计，用于大袋包装。主要由自动给料拖动系统、电气控制系统、自动计量称重系统、气动控制系统、挂袋托袋装置、除尘装置等组成。灌装时只需人工挂袋、套袋、给定信号后，便可完成自动夹袋、自动升降、自动计量、满秤时自动停机、松袋、完成一个工作循环。
技术参数
装袋能力： 10～40包/小时
准 确 度： ≤±0.2％
包装规格： 500～1000公斤/包
耗 气 量： 1－2m3 /h
电源电压： 380V, 50HZ
总 功 率： 3KW
技术特点
1．给料方式为卸料阀式，采用具用优良防尘结构的变频调速电机拖动，由国际顶级品牌变频器调节控制给料速度，可实现无级调整控制。
2．包装机的工作过程采用可编程控制器（PLC）程序控制，配有先进的触摸屏人机界面，既能完成工作过程的触摸控制，又能实现包装机全部工作过程和维护所需技术支持的人机对话。
3．按环保理念设计，在夹袋灌包处配有除尘装置，避免灌包粉尘外溢，确保优良工作环境。
4．设有独立升降式吊挂称重平台，净重法计量方式，称重系统为电子秤计量，称重控制显示仪表为进口数显式，采用全面板数字调校及参数设定，使操作过程十分简便。具有重量累计显示及自动去皮、自动校零、自动落差修正、超差报警和故障自诊断等功能。仪表配有通讯接口，便于联机、联网、时时监控和网络化管理。
5．设备主体由结构件制造，结构先进合理、安装方便，高度可以根据包装袋尺寸进行调整。
6．可与振动平台和辊道（链板）输送机械配套使用，形成一条自动化包装输送生产线。
CD1000-X Tonnage-sack Packing machine
System introduction
The packing machine is designed for large sack packing according to the powder products and granule materials such as metalloid mineral powder and chemical raw materials, etc. It mainly consists of automatic feeding and driving system, electrical control system, automatic measuring and weighing system, pneumatic control system, sack holding and supporting system, and dust collector. During the filling, except hanging and covering the sack manually, after sending the signal, the packing machine will automatically carry out the procedures such as clamping the sack, lifting, measuring, stop once a fill-up is achieved to the required amount and then releasing the sack. A working cycle is thus completed. widely applied in the fields such as chemical, ferrous powder, building materials, mining, grain, and feedstuff, etc.
Technical Parameters
Packing Capacity:10～40sacks/h
Accuracy:≤±0.2%
Packing Capacity:500～1000kg /sack
Air Consumption:1-2m3 /h
Supply Voltage: 380V, 50HZ
Motor Power: 3KW
Technical characteristic
It adopts the discharging valve for feeding, driven by the frequency-control motor with perfect dustproof structure, regulating and controlling the feeding speed by the frequency inverter of international top brand to achieve the stepless adjustment and control.
The working process of the packing machine is controlled by PLC programs, which may be fitted with the advanced touch screen human-machine interface to realize the touch control to the working process and the human-machine dialogue for technical supports required during the the packing machine’s entire working process and maintenance.
The packing machine is designed based on the environment-protection conception, with the dust collector fixed nearby the place where the sack is clamped and filled, to avoid the dust outspreading during filling and packing, and ensure a good working environment.
Independent lifting hanging-weighing platform is provided, with adopting the net weight measuring method. The weighing system adopts electronic-scale measuring and weighing control indicator is of imported digital display, adopting the entire panel digital calibration and parameters setting, which makes the operation very simple and convenient, featured with the functions such as displaying accumulative weight, auto tare deduction, auto zero calibration, auto fall correction, over tolerance alarm, and fault self-diagnosis. The indicator is fitted with communication interface to make it easy to form the computer network and then exercise real time monitoring and network management. The main frame of the equipment is made of structural parts, with the advanced and rational structure, and convenient installation – its height may be adjusted according to the container sack size.
It can be used together with the vibrating platform and roller-way (scraper chain) conveying machinery to combine an automatic packing and conveying production line.
系统说明
该包装机是根据非金属矿粉、化工原料等粉体和颗粒物料而设计，用于大袋包装。主要由自动给料拖动系统、电气控制系统、自动计量称重系统、气动控制系统、挂袋托袋装置、除尘装置等组成。灌装时只需人工挂袋、套袋、给定信号后，便可完成自动夹袋、自动升降、自动计量、满秤时自动停机、松袋、完成一个工作循环。
技术参数
装袋能力： 10～40包/小时
准 确 度： ≤±0.2％
包装规格： 500～1000公斤/包
耗 气 量： 1－
电源电压： 380V, 50HZ
总 功 率： 3KW
技术特点
1．给料方式为卸料阀式，采用具用优良防尘结构的变频调速电机拖动，由国际顶级品牌变频器调节控制给料速度，可实现无级调整控制。
2．包装机的工作过程采用可编程控制器（PLC）程序控制，配有先进的触摸屏人机界面，既能完成工作过程的触摸控制，又能实现包装机全部工作过程和维护所需技术支持的人机对话。
3．按环保理念设计，在夹袋灌包处配有除尘装置，避免灌包粉尘外溢，确保优良工作环境。
4．设有独立升降式吊挂称重平台，净重法计量方式，称重系统为电子秤计量，称重控制显示仪表为进口数显式，采用全面板数字调校及参数设定，使操作过程十分简便。具有重量累计显示及自动去皮、自动校零、自动落差修正、超差报警和故障自诊断等功能。仪表配有通讯接口，便于联机、联网、时时监控和网络化管理。
5．设备主体由结构件制造，结构先进合理、安装方便，高度可以根据包装袋尺寸进行调整。
6．可与振动平台和辊道（链板）输送机械配套使用，形成一条自动化包装输送生产线。
CD1000-X Tonnage-sack Packing machine
System introduction
The packing machine is designed for large sack packing according to the powder products and granule materials such as metalloid mineral powder and chemical raw materials, etc. It mainly consists of automatic feeding and driving system, electrical control system, automatic measuring and weighing system, pneumatic control system, sack holding and supporting system, and dust collector. During the filling, except hanging and covering the sack manually, after sending the signal, the packing machine will automatically carry out the procedures such as clamping the sack, lifting, measuring, stop once a fill-up is achieved to the required amount and then releasing the sack. A working cycle is thus completed. widely applied in the fields such as chemical, ferrous powder, building materials, mining, grain, and feedstuff, etc.
Technical Parameters
Packing Capacity:10～40sacks/h
Accuracy:≤±0.2%
Packing Capacity:500～
Air Consumption:1
Supply Voltage: 380V, 50HZ
Motor Power: 3KW
Technical characteristic
It adopts the discharging valve for feeding, driven by the frequency-control motor with perfect dustproof structure, regulating and controlling the feeding speed by the frequency inverter of international top brand to achieve the stepless adjustment and control.
The working process of the packing machine is controlled by PLC programs, which may be fitted with the advanced touch screen human-machine interface to realize the touch control to the working process and the human-machine dialogue for technical supports required during the the packing machine’s entire working process and maintenance.
The packing machine is designed based on the environment-protection conception, with the dust collector fixed nearby the place where the sack is clamped and filled, to avoid the dust outspreading during filling and packing, and ensure a good working environment.
Independent lifting hanging-weighing platform is provided, with adopting the net weight measuring method. The weighing system adopts electronic-scale measuring and weighing control indicator is of imported digital display, adopting the entire panel digital calibration and parameters setting, which makes the operation very simple and convenient, featured with the functions such as displaying accumulative weight, auto tare deduction, auto zero calibration, auto fall correction, over tolerance alarm, and fault self-diagnosis. The indicator is fitted with communication interface to make it easy to form the computer network and then exercise real time monitoring and network management. The main frame of the equipment is made of structural parts, with the advanced and rational structure, and convenient installation – its height may be adjusted according to the container sack size.
It can be used together with the vibrating platform and roller-way (scraper chain) conveying machinery to combine an automatic packing and conveying production line.
相关产品推荐
