| |
|
K-308T |
|
E308T0-1/-4 |
|
YF308C |
|
YF308C |
|
K-308T is formulated for MAG welding of 18%Cr-8%Ni stainless steels.It is designed for operation primarily in the flat position and for weldling horizontal fillet welds | |
| |
|
K-308LT |
|
E308LT1-1/-4 |
|
YF308LC |
|
YF308LC |
|
K-308LT is designed for MAG welding of low carbon 18%Cr-8%Ni stainless steels. (AISI 304, 304L, 304LN, ASTM A157 Gr. C9; A320 Gr. B8C or D) | |
| |
|
K-309T |
|
E309T0-1/-4 |
|
YF309C |
|
YF309C |
|
K-309T is formulated for MAG welding of 22%Cr-12%Ni stainless steels. Typical applications is for welding of dissimilar steels, such as 304 to mild steel or low alloy steels. | |
| |
|
K-309LT |
|
E309LT1-1/-4 |
|
YF309LC |
|
YF309LC |
|
K-309LT is designed for MAG welding of low carbon 22%Cr-12%Ni stainless steels. Dissimilar joint welds ; of and between high-strength, mild steels and low-alloyed QT-steels, stainless, ferritic Cr- and austenitic Cr-Ni-steels, manganese steels. Cladding ; for the first layer of corrosion resistant weld claddings on ferritic-perlitic steels in boiler and pressure vessel parts up to fine-grained steel S500N. | |
| |
|
K-309LMT |
|
EC309L |
|
YF309LG |
|
YF309LG |
|
K-309LMT is designed for MAG welding of low carbon 22%Cr-12%Ni stainless steels.It is suitable for automotive exhaust fabricators such as front pipe, bellows, flange. (AISI 409, 436, cladding and dissimilar joint welds) | |
| |
|
K-309MoLT |
|
E309LMoT1-1 |
|
YF309MoLC |
|
YF309MoLC |
|
K-309MoLT is designed for MAG welding of low carbon 22%Cr-12%Ni-Mo stainless steels. Dissimilar joint welds ; of and between high-strength, mild steels and low-alloyed QT-steels, stainless, ferritic Cr- and austenitic Cr-Nisteels, manganese steels. Cladding ; for the first layer of corrosion resistant weld claddings on ferritic-perlitic steels in boiler and pressure vessel parts up to fine-grained steel S500N. | |
| |
|
K-312T |
|
E312T1-1 |
|
- |
|
- |
|
K-312T is formulated for MAG welding of 30%Cr-9%Ni stainless steels. It is used for joining dissimilar steels, steels with reduced weldability and buffer layers prior to hardfacing (rolls, forging dies, hotwork tools, dies for plastics and so on) | |
| |
|
K-316T |
|
E316T0-1/-4 |
|
YF316C |
|
YF316C |
|
K-316T is formulated for MAG welding of 18%Cr-12%Ni-2%Mo stainless steels where increased resistance to pitting corrosion is required (AISI 316, 316L) | |
| |
|
K-316LT |
|
E316LT1-1/-4 |
|
YF316LC |
|
YF316LC |
|
K-316LT is designed for MAG welding of low carbon 18%Cr-12%Ni-2%Mo stainless steels. This wire has low carbon content which gives good resistance to most types of corrosion of the weld metal (AISI 316L, 316Ti, 316Cb) | |
| |
|
K-317LT |
|
E317LT1-1 |
|
YF317LC |
|
YF317LC |
|
K-317LT is designed for MAG welding of low carbon 19%Cr-13%Ni-3%Mo stainless steels. The principal area of plication is process and chemical plant, shipbuilding as well as clear plant industries. | |
