厂商 ：济南晨旭机器有限公司
山东 济南- 主营产品：
- 门窗设备
- 铝门窗设备
- 断桥铝门窗设备
联系电话 ：13176698882
商品详细描述
设备特点 Equipment Features
◆该钻床主要用于铝合金门窗、幕墙型材的钻孔，特别适用于长料及大批量生产。
◆适用于截面不超过250mm×250mm的型材，加工长度最大达到5000mm.
◆可安装多头钻座，满足多组群孔的同时加工。
◆进给系统采用气液阻尼缸，进给平稳。
◆采用施耐德控制系统，可实现任意机头的联动。
◆It is used for drilling holes of alumunum and curtain-wall profiles,Apply to volume-produce
◆Max processing profile section size is 250 ×250mm,max processing length is 5000mm
◆Multi-head boring anchor can be fixed to meet multi-holes processing requirement.
◆Feeding system adopts airdraulic-damping cylinder,which ensured smooth feeding.
◆Imported Schneider PLC control system with steady capability
主要规格及技术参数 Main Specification and Technical Parameter
◆该钻床主要用于铝合金门窗、幕墙型材的钻孔，特别适用于长料及大批量生产。
◆适用于截面不超过250mm×250mm的型材，加工长度最大达到5000mm.
◆可安装多头钻座，满足多组群孔的同时加工。
◆进给系统采用气液阻尼缸，进给平稳。
◆采用施耐德控制系统，可实现任意机头的联动。
◆It is used for drilling holes of alumunum and curtain-wall profiles,Apply to volume-produce
◆Max processing profile section size is 250 ×250mm,max processing length is 5000mm
◆Multi-head boring anchor can be fixed to meet multi-holes processing requirement.
◆Feeding system adopts airdraulic-damping cylinder,which ensured smooth feeding.
◆Imported Schneider PLC control system with steady capability
主要规格及技术参数 Main Specification and Technical Parameter
| 电源电压 | Voltage | 380V 50HZ |
| 功率 | Cutting motor Power | 4×0.75kw |
| 最大钻孔直径 | Max drilling hole diameter | 13mm |
| 两钻孔最大距离 | Max distance between two drilling holes | 5000mm |
| 每组孔最小距离 | Min distance between each group holes | 300mm |
| 动力头数量 | Power unit quantity | 4 |
| 钻头前后移动最大距离 | Max moving distance at horizontal direction of drilling head | 120mm |
| 动力头上下移动距离 | Moving distance at vertical direction | 150mm |
| 工作台尺寸 | Worktable size | 300×300mm |
| 钻头进给行程 | Drilling head feeding travel | 125mm |
| 进气压力 | Feeding pressure | 0.5MPa-0.8MPa |
| 加工铝型材最大截面尺寸 | Max processing profile section size | 250×250mm |
| 外形尺寸 | Contour Dimension | 6000mm×1000mm×1900mm |
相关产品推荐
