铝电解电容100UF/10V

厂商：东莞市厦禾电子有限公司

广东东莞

主营产品：
高压电容
陶瓷电容
碳膜电阻

联系电话：15899916689

商品详细描述

3.2	Vibration Resistance 耐振性	The frequency of the vibration shall vary uniformly within the range 10 to 55 Hz with the amplitude of 1.5mm,completing the cycle in the internal of one Minute. The capacitor shall be securely mounted by its leads whit hold the body of capacitor . The capacitor shall be vibrated in three mutually perpendicular directions for a period of 2 hours in each direction. 振动频率要均匀,范围为10Hz,到55Hz,振幅为1.5mm,在1分钟内完成该循环. 电容器将由端子牢固地固定. 电容器会被向三个互相垂直的方向每个方向振动2小时	Capacitance : no unsteady 静电容量 : 稳定 Appearance : no abnormal 外观 : 无异常 Capacitance change : Within±5% of initial measured Value 容量变化 : 最初测得值的 ±5%之内
3.3	Solder ability 焊锡性	The leads are dipped in the solder bath of sn At 260 ± 5℃ for 2 ± 0.5 second . The dipping Depth should be set at 1.5~2.0mm 端子浸没在260 ± 5℃ 的锡焊液中 2 ± 0.5秒 . 浸没深度设定为1.5~2.0mm	The solder alloy shall cover the95% or more of the dipped leads area . 锡液要覆盖导针浸入表面积的95%以上 .

4. Reliability 信赖度

NO	ITEM 项目	TEST METHOD 测试方法	SPECIFICATION 规格
4.1	Soldering heat Resistance 焊锡耐热性	The leads immerse in the solder bath of sn at 260 ± 5℃ for 10 ± 1 seconds until a distance of 1.5~2mmfrom the case . 导针在260 ± 5℃的锡焊液中浸没至离本体1.5 ~2mm的地方10±1 秒钟	No damage or leakage of Electrolyte 无损伤或电解液漏出 . Capacitance change : Within ± 10% of the initial measured value . 容量变化:最初测定值10%以内 Tan δ: Less than specified value . 损失角: 低于规定值 . Leakage current: Less than specified value. 泄漏电流: 低于规定值 .
4.2	Damp heat (Steady state ) 耐湿性 ( 稳定状态 )	Subject the capacitors to 40 ± 2℃ and 90% to 95% relative humidity for 240 ± 8 hours . 电容器在 40 ± 2℃ and 90%到95%的条件下经历240±8小时 .	Capacitance change: Within ± 10% of the initial Measured value . 容量变化:最初测定值10%以内 Tan δ: Less than specified value . 损失角: 低于规定值 . Leakage current : Less than specified value . 泄漏电流: 低于规定值 .

标签：