厂商 :温州中环机械设备有限公司
浙江 温州市- 主营产品:
- 软管封尾机
- 贴标机
- 装盒机
联系电话 :13777774775
商品详细描述
ZRJ-500L真空乳化机
1. 结构形式:有主机1台,油相锅1只,水相锅1只,操作平台1件等组成。主锅,油相锅,水相锅的内胆材质316L,夹套材质304,外套材质304。
2. 主锅有效容量550L,工作量500L,油相锅有效容积250L,水相锅有效容量310。油水锅主要将物料预热,然后进入主锅乳化。
3. 加热方式:电加热,功率主锅12kw,油相锅8kw,水相锅8kw。夹套内可进行油加热或进水加热,如果进油加热必须配一只油罐容积为150L,配一台转油泵,就可以循环加热。
4. 冷却方式:自来水冷却。
5. 乳化方式:均质器与高速切剪刀进行乳化。电机功率7.5kw-2p变频调速。
6. 搅拌方式:框式回流搅拌桨进行搅拌及刮壁,功率3.7kw-4p变频调速。
7. 开盖方式:双杆液压升降,电机功率2.2kw,配有安全自锁装置。
8. 进料方式:真空自吸进料,主要由油相锅和水相锅的物料进入主锅乳化。
9. 出料方式:有三种,1.底部气动出料 2. 电动倒锅出料 3. 正气压出料。
10. 控制方式:所有动作及温度均由触摸屏控制(包括进出料)
11. 外开尺寸:主机长×宽×高,2900×1200×2600mm。工作时上升高度3800mm 包含油水锅整套外形尺寸:长×宽×高 3500×3050×2600mm
ZRJ-500L Cream Vacuum Emulsification Blender
1. Composition: main machine one set, oil tank one unit, water tank one unit, operation platform one set, 316L stainless steel for the inner material of main tank, oil tank, water tank, 304 stainless steel for jacket material and outer material of main tank, oil tank, water tank.
2. Valid volume for main tank: 550L; Working volume: 500L; Valid volume for oil tank: 250L; Valid volume for water tank: 310L; Oil and water tank is used for pre-heating the material, then the material enters the main tank for emulsification blending.
3. Heating method: heating by electricity, power of main tank: 12kw, power of oil and water tank: 8kw, heating medium can be used by oil or water, if heating by oil, it should heat cycling by oil pump and another oil tank (150L).
4. Cooling method: cooling by water
5. Emulsification method: emulsified by mixer and high-speed scissors. Power: 7.5kw-2p frequency converter
6. Blending method: Frame type overflow mixing paddle is mixing the material and scraping the wall
7. Cap open method: lift by hydraulic pressure, motor power: 2.2kw, with safety auto-lock system.
8. Material feeding method: auto-sucking the material under vacuum from oil and water tank into the main tank.
9. Material releasing method: three ways: 1. From the outlet pipe under the main tank by pneumaticity. 2. From turning over the main tank by electricity. 3. by positive air pressure.
10. Control method: Controlled all by touch screen, including the temperature and material feeding and releasing.
11. Outer dimension: main machine: 2900*1200*2600mm; the maximum lifting height: 3800mm; including the oil and water tank dimension: 3500*3050*2600mm.
1. 结构形式:有主机1台,油相锅1只,水相锅1只,操作平台1件等组成。主锅,油相锅,水相锅的内胆材质316L,夹套材质304,外套材质304。
2. 主锅有效容量550L,工作量500L,油相锅有效容积250L,水相锅有效容量310。油水锅主要将物料预热,然后进入主锅乳化。
3. 加热方式:电加热,功率主锅12kw,油相锅8kw,水相锅8kw。夹套内可进行油加热或进水加热,如果进油加热必须配一只油罐容积为150L,配一台转油泵,就可以循环加热。
4. 冷却方式:自来水冷却。
5. 乳化方式:均质器与高速切剪刀进行乳化。电机功率7.5kw-2p变频调速。
6. 搅拌方式:框式回流搅拌桨进行搅拌及刮壁,功率3.7kw-4p变频调速。
7. 开盖方式:双杆液压升降,电机功率2.2kw,配有安全自锁装置。
8. 进料方式:真空自吸进料,主要由油相锅和水相锅的物料进入主锅乳化。
9. 出料方式:有三种,1.底部气动出料 2. 电动倒锅出料 3. 正气压出料。
10. 控制方式:所有动作及温度均由触摸屏控制(包括进出料)
11. 外开尺寸:主机长×宽×高,2900×1200×2600mm。工作时上升高度3800mm 包含油水锅整套外形尺寸:长×宽×高 3500×3050×2600mm
ZRJ-500L Cream Vacuum Emulsification Blender
1. Composition: main machine one set, oil tank one unit, water tank one unit, operation platform one set, 316L stainless steel for the inner material of main tank, oil tank, water tank, 304 stainless steel for jacket material and outer material of main tank, oil tank, water tank.
2. Valid volume for main tank: 550L; Working volume: 500L; Valid volume for oil tank: 250L; Valid volume for water tank: 310L; Oil and water tank is used for pre-heating the material, then the material enters the main tank for emulsification blending.
3. Heating method: heating by electricity, power of main tank: 12kw, power of oil and water tank: 8kw, heating medium can be used by oil or water, if heating by oil, it should heat cycling by oil pump and another oil tank (150L).
4. Cooling method: cooling by water
5. Emulsification method: emulsified by mixer and high-speed scissors. Power: 7.5kw-2p frequency converter
6. Blending method: Frame type overflow mixing paddle is mixing the material and scraping the wall
7. Cap open method: lift by hydraulic pressure, motor power: 2.2kw, with safety auto-lock system.
8. Material feeding method: auto-sucking the material under vacuum from oil and water tank into the main tank.
9. Material releasing method: three ways: 1. From the outlet pipe under the main tank by pneumaticity. 2. From turning over the main tank by electricity. 3. by positive air pressure.
10. Control method: Controlled all by touch screen, including the temperature and material feeding and releasing.
11. Outer dimension: main machine: 2900*1200*2600mm; the maximum lifting height: 3800mm; including the oil and water tank dimension: 3500*3050*2600mm.
相关产品推荐
- 供应香水灌装压盖机 精油灌装压盖机 化妆品灌装压盖机 日化灌装压盖机
- 供应香水灌装锁盖机 精油灌装锁盖机 化妆品灌装锁盖机 日化灌装锁盖机
- 供应香水灌装机 花露水灌装机 精油灌装机 化妆品灌装机 日化灌装机
- 供应直线式旋盖机 温州旋盖机 高速旋盖机 食品旋盖机 药片旋盖机
- 供应水粉两用袋包机 调味料袋装机 药剂袋装机 干燥剂袋装机 袋装机械
- 供应全自动螺纹封口机 螺纹旋盖机 高速旋盖机 多功能旋盖机 旋盖机械
- 供应粉剂袋装机 粉状物袋装机 颗粒物袋装机 液体袋装机 膏体袋装机
- 供应泵头盖旋盖机 医药泵头旋盖机 化工泵头旋盖机 食品泵头旋盖机
- 供应微电脑自动贴标机 自动贴标机 高精度贴标机 不规则贴标机 贴标机
- 供应医药袋装机 化工袋装机 食品袋装机 化妆品袋装机 小吃袋装机