厂商 :北京松信宏泽科技有限公司
北京- 主营产品:
- 食品安全检测仪
- 辐射剂量仪
- 英国PPM甲醛检测仪
联系电话 :13552305211
商品详细描述
YTT-150系列差动远传压力表
YTT-150 Series Differential Motion Remote Transmitting Pressure Meter
YTT-150系列差动远传压力表简介
YTT-150系列差动远传压力表用于测量对铜及其合金不起腐蚀作用的液体、气体和蒸汽的压力。仪表带上阻尼器后,可测量脉动、冲击、突然卸荷介质的压力。带上隔膜部分后,可测量粘度大、有腐蚀性介质的压力。本仪表除就地进行压力指示外,还连续输出与被测压力信号成线性的4~20mA或0-10mA直流信号。可以与分别DDZ-Ⅲ电动单元组合仪表中的显示、记录、调节仪表联用,组成自动记录、调节、控制等系统。适用于石油化工、冶金、电站、轻工业等部门使用。
YTT-150 series differential motion remote transmitting pressure meter is used for measuring pressures of liquids, gases, or vapors that do not corrode copper and its alloys. If equipped with shock damper, this meter mayalso measure
Pressures caused by pulsation, concussion, and sudden unloaded mediums. If equipped with diaphragm, it may also be used to measure pressures of such mediums with big viscosity and causticity.This instrument provides not only local pressures with indication, but also continual output of 4~20mA direct current signal with linear relationship with its testee pressure signal. It may compose automatic recording, adjustment, control, or other systems, in combination with displaying, recording, and adjusting instruments of DDZ-II electricity-powered units, applicable for applications in such departments as petroleum chemical industry, metallurgy, or light industry.
YTT-150系列差动远传压力表主要技术参数
型号规格 Types and specifications
外形尺寸 External dimension
接口尺寸包括:M20×1.5;G1/2;1/2NPT
Joint dimension includes: M20x1.5, G1/2, and 1/2NPT.
仪表选型指南

- 精确度:1.6级
- 输出信号:4~20mA DC或0~10mA AC,二线制或四线制
- 负载电阻:250Ω~350Ω
- 供电电源:直流24V
- 工作环境:
(1)温度:-10~+55℃
(2)相对湿度:≤85%
(3)外磁场:≤5奥斯特 - Accuracy: : grade 1.6
- Output signal: 4~20mA DC,0~10mA AC
two or four wire system - Resistance value of load: 250Ω~350Ω
- Power supply: 24V DC
- Working environment:
(1) Temperature: -10~+55℃
(2) Relative humidity: ≤85%
(3) External magnetic field: ≤5oresteds




订货须知 Ordering instructions
订货时须注明:产品电脑编码、型号、名称、精确度、测量范围。如特殊要求,请注明技术要求。
Ordering instructions: The product computer code ,types, names, accuracy grades, and measuring ranges .must be clearly noted. In case of special requirements, technical requirements shall be clearly noted specifications on the back of the order on ordering goods.
相关产品推荐