路博润ESTANE ZHF 95AP7 TPU

路博润ESTANE ZHF 95AP7 TPU ESTANE? ZHF 阻燃型TPU 化合物是一种非卤（无卤）技术。 主要用于 电线和电缆 护套，但也可用于软管和硬管、注塑以及织物涂料应用。 如需查看其他阻燃等级，请访问 ESTANE? 58000 产品页面，具体为ESTANE? 58244。 高热 ESTANE? TS92AP7 等级是对这一电缆用产品的有利补充。此外， ESTANE? EV系列 NHFR材料解决方案是针对电动汽车充电系统电缆而专门设计的。 Technical Data Sheet Type: ESTANE? ZHF 95AP7 is a 95A aromatic Thermoplastic Polyurethane (TPU) Features: Zero halogen, flame retardant compound with low smoke and high Limiting Oxygen Index Uses: Extrusion – wire and cable jacketing and general extrusion where demanding flame-retardant properties are required. ? Prior to testing samples were conditioned at 23°C for 48 hours. ? Based on extruded sheet (30 mils). ? Listed values are “typical (erage) values” and should / cannot be applied for specification pures. Supply Form and Standard Packaging ? ESTANE? ZHF 95AP7 is supplied in pellet form and packaged in 50 lb bags or 1000 lb boxes. Material Preparation ? Prior to processing, ESTANE? ZHF 95AP7 must be dried at 220°F (104°C) for 2-4 hours. ? It is recommended to dry the material in a desiccant type dryer. Target dew point should be -40°C. ? Depending on the applied processing technique, the maximum moisture level should be 0.02%. Processing Conditions ? ESTANE? ZHF 95AP7 can be processed on any conventional extruder. Physical Properties Value (Metric) Unit Test Method Hardness (5 sec) 93 +/- 3 Shore A ASTM D-2240 Specific Grity 1.40 ASTM D-792 Tensile Strength 3000 (20.7) psi (MPa) ASTM D-412 Ultimate Elongation 320 % ASTM D-412 Tensile Stress at - 100 % Elongation 2200 (15.2) psi (MPa) ASTM D-412 - 300 % Elongation 2800 (19.31) psi (MPa) ASTM D-412 Tear Strength Gres 500 (9.0) lb/in (kg/mm) ASTM D-624 (die C) Trouser 125 (2.27) lb/in (kg/mm) ASTM D-470 Taber Loss (1000 rev) 0.00356 (101) oz (mg) ASTM D-3389 (H-18, 1000g) Tm (by DMA) 413 (212) °F (°C) Lubrizol Advanced Materials Tg (by DMA) 3 (-16) °F (°C) Lubrizol Advanced Material