厂商 :河北北山环保设备有限公司
河北 廊坊市- 主营产品:
- 除雾器
- 管束除尘器
- 喷嘴
河北北山环保设备有限公司 1、Technical Description/技术描述 A proper operation of the mist eliminator system must be guaranteed by a appropriatedesign. 正确地设计将确保除雾器系统正确的运行。 This will be done for example by:例如: □Design of the lamellaprofile/除雾器叶片的设计 □Distance between the lamellas/叶片间的距离 □Range of flow velocity气体流速的范围 □Design of the spray system/冲洗系统的设计 □Nozzle type selection/喷嘴的选型 □Flow conditions/气流条件 □Installation situation/安装情况 □Consideration of the flow distribution/对流体分布的考虑 □Solid content within the gas flowand the suspension/气流和悬浮液中的固含量 □Wash water quality/冲洗水水质 All these parameters influence the operation of the total system and must be consideredduring engineering and design. 所有这些参数都会影响整个系统的运行,因此在设计和工程中被充分考虑。 The coition of the flushing water is of particular importance.The coites mustnot trigger any subsequent reaction in the mist eliminator which can,in turn,result in socalled Hardscaling on the part of the deits on the separator.Hardscaling arecrystalline and hard particles which can not be flushed away by the spray system. 冲洗水的成分非常的重要。这些成分必须不会在除雾器中造成再反应,例如在除雾器上的部分沉淀物中造成所谓的硬结垢。硬结垢由一些不能被冲洗系统冲走结晶和硬的颗粒组成。 Only soluble deits,which stay after the absorber reaction in the gas flow,can berinsed.Wheneverit comes to Hardscaling a failure of the mist eliminator can be theresult. 只有那些在气体中的可溶的沉淀物才能被冲洗掉。当产生硬结垢时,除雾器将形成故障。