烫商标机卷标机

适用范围Scope of application:  

1、广泛运用于鞋垫商标的热转印、鞋舌标、内里标的转印，用于各类热转印标的热转印工艺。Widely use in the flat,circular insole/tongue thermal transfer for label.

 

2、适用于皮革、包装等行业的烫金工艺。Suitable for the gold stamping of leather, package and other industries.

 

产品特点Features：

1、 人机界面智能化，中英越多种国家语言，操作直观。Intellectualized human- machine interface, Chinese/English/ Vietnamesesystems,easy to operate. 

2、 采用高精度光纤定位，转印纸自动定位，定位进度可达±0.02mm以内，足以适用所有品牌精度要求。High precision fibre-optical position system, auto location of transfer paper, position accuracy to±0.02mm.

3、 转印纸采用卷对卷形式，相对小片材式转印纸，更方便管理，使用过后更容易处理，环境保持整洁。Roll to roll transfer paper, convenient management, keep the environment clean and tidy.

4、 采用一对一定位方式，从而适用于人工印刷的转印纸。不会因为人工印刷转印纸导致的转印标之间的间距误差而产生偏差。Use the one-to-one locate mode, manual printing transfer paper also issuitable, there is no any error because thedistance different.  

5、 操作简单，人工只需根据定位块放置材料，生手即可快速掌握，大大减少工厂培训成本，产能不因熟手的流失而下降。Easy to operate, workers only need put the material according to the position of locating piece, novices can easy to handle, greatly reduce the factory training cost, and the output will not decrease when the skilled worker leaves.

6、 在确保精度的情况下，转印效率大大高，效率可达1200片/小时。Highefficiency, the maximum yield 1200pcs/ hour.

7、 温度、压力、转印时间均可根据客户实际要求设置，可以根据温度的偏差进行纠正，可根据客户要求设置温度异常、气压压力异常报警。保证产品品质。Temperature, pressure, pressing time can be adjusted according to the press effect, and also can set the trouble alarm of temperature trouble alarm, pneumatic pressure to ensure the product quality.  

8、 一机多用，除了商标的热转印，还可以只需更换烫印模具即可进行烫金操作，切换简单。Multi-purpose, also can gold stamping after change the mold.

 

型号Model No.	机台尺寸（mm）Machine measure	出口木箱尺寸(mm) Wood case measure	净重/毛重（kgs）    N.W/ G.W (kgs)	产能Capacity
FLD-590C	1140*830*1460	1200*890*1560	210/240	1200片/小时 1200pcs/ hour
FLD-590C-1	1200*655*1360	1250*730*1560	190/245
	电源电压Voltage	气源气压Air pressure	功率Power	温度可调范围Heat transfer temperature
	AC220V50HZ	0.45~0.55mpa	1.5KW	30~280℃

 

对比Contrast：

	产能对比Capacity	生手熟手对产能影响The impact of skilled and novice	操作人数Operator	放料方式Feeding way	定位方式Locate mold
傳統設備Traditional machine	600片/小时 600pcs/h	大Big	1	手动Manual	人工定位，精度稳定性低Manual location, low accuracy
FLD-590C/C-1	1200片/小时 1200pcs/h	小Small	1	手动Manual	光纤定位，精度稳定性高Fibre-optical location, high accuracy

总结Conclustion：1、采用FLD-590C设备，比传统人工定位更加精确，保证了品质的前提下还大大提高了生产效率，给工厂带来品质保证的前提下还能节省人工成本。按照人工平均工资每月3500元计算，一年可节省3500*12=42000元/人/年。Use FLD-590C, higher accuracy location than manual location, high efficiency, and can save the labor cost. For example: Monthly labor cost 3500 yuan, labor cost is 3500x12=42000 a year, if use the FLD-590C, twice capacity of the traditional machine, so can save 42000 yuan a year.

2、采用FLD-590C设备对熟手依赖性降低，确保工厂每日产能不受熟练工的缺勤而影响，使工厂产能更加可控。Use FLD-590C is less depending on skilled, ensure the daily capacity.

富伦德主要生产烫商标机、削泡棉机、鞋垫烫标机、鞋舌转印烫金机、鞋垫热转印机、鞋垫裁断转印一体机、鞋垫印刷机、丝印机、压花机、软胶设备、真空硫化机、硅胶商标机、点胶机等.
适用范围：机器主要用于橡胶、鞋、箱包、手套、皮具、服装、体育用品、运动器材、玩具、硅胶用品厂等行业的各种不同形状冲孔、裁边、鞋垫转印,商标烫印,印刷等。