厂商 ：深圳市兴知源电子科技有限公司
广东 深圳市- 主营产品：
- 电子元器件
- 芯片IC
- 仿真器 下载器 编程
联系电话 ：15899887941
商品详细描述
Xilinx Platform Cable USB II
特性：
1．支持Xilinx全系类芯片(ALL)
2．可烧写第三方flash
3．支持Xilinx的ISE、Vivado 、EDK、SDK、iMPACT和ChipScope(全)
4．支持JTAG、Slave Serial和SPI等配置模式
5．目标器件下载时钟可选，最高可达24 MHz
6．LED状态指示灯指示目标器件电源状态
7．使用方便，只有要USB口的计算机都可以，无需并口
8. 目标器件IO电压兼容1.5V--5V
支持下列操作系统：
>>>
—Microsoft Windows 7\Windows 8\Windows 10
—Microsoft Windows XP Professional
—Microsoft Windows Vista
—Windows 2000
—Red Hat Enterprise Linux
—SUSE Linux Enterprise
·自动判别和适应目标I/O电压
·兼容目示器件电压范围：5V (TTL), 3.3V(LVCMOS), 2.5V, 1.8V and 1.5V
·向后兼容Cable USB平台包括Pb-Free (RoHS-compliant)
·行业标准：包括JTAG边界扫描IEEE 1149.1，SPI和USB 2.0
Features
- High-performance FPGA and PROM programming andconfiguration
Includes innovative FPGA-based acceleration firmware encapsulated in a small form factor pod
attached to the cable
Leverages high-speed slave-serial mode programming interface
Note: Slave-serial mode is supported in Xilinx iMPACT software v10.1.
Recommended for prototyping use only
- Easy to use
Fully integrated and optimized for use with Xilinx iMPACT software
Intuitive multiple cable management from a single application
Supported on the following operating systems:
Note: See the Xilinx design tool release notes for
supported operating systems.
- Microsoft Windows XP Professional
- Microsoft Windows Vista
- Red Hat Enterprise Linux
- SUSE Linux Enterprise
Automatically senses and adapts to target I/O voltage
Interfaces to devices operating at 5V (TTL), 3.3V (LVCMOS), 2.5V, 1.8V and 1.5V
Intuitive flyleads-to-cable interface labeling
- Reliable
Backwards compatibility with Platform Cable USB,including Pb-Free (RoHS-compliant)
USB Integrators Forum (USB-IF) certified
CE and FCC compliant
Leverages industry standards, including JTAG boundary-scan IEEE 1149.1, SPI and USB 2.0
- Programs and configures all Xilinx devices
XC18V00 ISP PROMs
Platform Flash XCF00S/XCF00P/XL PROMs
All UltraScale, 7 series, Virtex, and Spartan
FPGA families, and Zynq-7000 AP SoCs
XC9500XL and CoolRunner XPLA3 /CoolRunner-II CPLDs
Note: Xilinx iMPACT software or Vivado design tools
are required for programming and configuration. See the
design tool release notes for supported devices.
- Third-party PROM device programming support
Directly programs selected Serial PeripheralInterface (SPI) flash memory devices
Note: Direct SPI flash memory programming supported in Xilinx iMPACT software v10.1.
ndirectly programs selected SPI or parallel flash memory devices via FPGA JTAG port
- Highly optimized for use with Xilinx design tools
Vivado design tools or ISE design tools
Embedded Development Kit
ChipScope Pro Analyzer
System Generator for DSP
Platform Cable USB II Description
Much more than just a simple USB cable, Platform Cable USB II provides integrated firmware (hardwareand software) to deliver high-performance, reliable and easy-to-perform configuration of Xilinx devices.
Platform Cable USB II attaches to user hardware for the purpose of configuring Xilinx FPGAs, programming Xilinx PROMs and CPLDs, and directly programming third-party SPI flash devices. In addition, the cable provides a means of indirectly programming Platform Flash XL, third-party SPIflash memory devices, and third-party parallel NOR flash memory devices via the FPGA JTAG port. Furthermore,Platform Cable USB II is a cost effective tool for debugging embedded software and firmware when used with applications such as Xilinx's Embedded Development Kit and ChipScope Pro Analyzer.
Platform Cable USB II is an upgrade to and replaces Platform Cable USB. Similar to its popular predecessor, Platform Cable USB II is intended for prototyping environments only. Platform Cable USB II is backwards Compatible with Platform Cable USB and is supported by all Xilinx design tools that support Platform Cable USB.
Platform Cable USB II attaches to the USB port on a desktop or laptop PC using an off-the-shelf Hi-Speed USB A–B cable.The cable derives all operating power from the hub port controller — no external power supply is required.
Note: Sustained data transfer rates in a Hi-Speed USB environment vary according to the number of USB devices sharing the hubbandwidth. Native signaling rate (480 MHz) is not directly correlated to application throughput.
Device configuration and programming operations using Platform Cable USB II are supported by Xilinx iMPACT download software using boundary-scan (IEEE 1149.1/IEEE 1532), slave-serial mode, or serial peripheral interface (SPI). The Vivado design tools support device configuration with the Platform Cable USB II using boundary-scan (IEEE 1149.1).
Note: iMPACT software is bundled with the ISE design tools and WebPACK ISE software. The slave-serial mode and direct SPI are only supported in limited versions of the ISE iMPACT tool.
In addition, Platform Cable USB II is optimized for use with the Xilinx Embedded Development Kit, ChipScope Pro Analyzer,and System Generator for DSP. When used with these software tools, the cable provides a connection to embedded target systems for hardware configuration, software download, and real-time debug and verification. Target clock speeds areselectable from 750 kHz to 24 MHz.
Platform Cable USB II attaches to target systems using a 14-conductor ribbon cable designed for high-bandwidth datatransfers. An optional adapter for attaching a flying lead set is included for backward compatibility with target systems not using a ribbon cable connector.
Device Family Support
l Kintex UltraScale+
l Kintex UltraScale
l Virtex UltraScale+
l Virtex UltraScale
lSpartan-7l Artix-7
l Zynq-7000
l Kintex-7
l Virtex-7
l Virtex-6
l Virtex-5 FX
l Virtex-5 LX
l Virtex-5 SX
l Virtex-4
l Virtex-II Pro
l Virtex-II
l Virtex-E
l Virtex
l Spartan-6
l Spartan-3A
l Spartan-3A DSP
l Spartan-3AN
l Spartan-3E
l Spartan-3
l Spartan-II
l Spartan-IIE
l Spartan
l CoolRunner-II
l CoolRunner XPLA3
l Platform FLASH
l XC18Vxx Series
l XC9500
l lXC9500XL
标签：
相关产品推荐
