厂商 ：上海临滴科技有限公司
上海市 上海市- 主营产品：
- 智能电视机主板
- 投影仪主板
- 超薄工控机
LBA3288
产品概述
LBA3288是基于瑞芯微RK3288芯片平台精心设计的一款全功能行业板，RK3288主频高达1.8GHz，集成四核Mali-T764 GPU，板载有两路双8位LVDS、EDP、HDMI、MIPI（可选）多种显示接口，全面兼容主流显示屏，可直接驱动主流5-100寸的显示屏，支持多屏异显，最大支持4K硬解。板载MINI PCIE接口座及SIM座，可接3G / 4G移劢通信模块。板载RS232、RS485 接口，方便连接各种工业设备。
产品参数
|
Function |
Description |
|
CPU |
RK3288, Quad-core ARM Cortex-A17,up to 1.8GHZ frequency |
|
GPU |
ARM Mali- T764 GPU core High performance OpenGL ES1.1/2.0/3.0, OpenCL 1.2, DirectX 11 High performance 2D Graphics Engine |
|
VPU |
Real-time video decoder of MPEG-1, MPEG-2/4, H.263/264, AVS, VC-1, VP8, MVC H.264 up to HP level 5.1: 2160p@24fps MPEG-1/2/4 VP8/AVS/MVC up to 1080p@60fps VC-1/ up to 1080p@30fps video encoder for H.264, MVC and VP8 |
|
DDR |
DDR3，1GB/2GB(Optional) |
|
eMMC |
eMMC 5.1， 8GB/16GB/32GB/64GB/128GB(Optional) |
|
PMU |
RK808 |
|
Net work |
10/100/1000Mbps Ethernet (Realtek RTL8211E) Wi-Fi 2.4GHz/5GHz,802.11a/b/g/n/ac, up to 433 Mbps (AP6256) BT V5.0 with BLE supported 2G/3G/4G LTE module supported (optional) |
|
Storage |
MicroSD (TF) Card Compatible with SDIO3.0 |
|
OS |
Android / Ubuntu / Buildroot |
|
PCB size |
L* W (mm)：142 * 100（PCB 1.6mm） |
|
Screw size |
φ3.6mm |
|
Hardware Interface |
|
|
Power |
DC12V - 2A (DC Jack 5.5*2.1mm / PH2.0 wafer connector) |
|
USB |
2*Type-A USB2.0 HOST + 2*4Pin PH2.0 USB2.0 HOST connector |
|
Display |
Type-A HDMI 2.0 up to 4K@60HZ MIPI-DSI up to 1080P@60HZ eDP1.1 20Pin PH2.0 up to 4Kx2K @ 30fps 2x Duel channel LVDS up to 1080P@60HZ |
|
Audio |
φ3.5mm earphone Jack with L/R audio out and Mic in 1x analog microphone 1x HDMI audio out 2x 3W/4Ω speaker out with L/R channel |
|
Camera |
2x MIPI-CSI interface with ISP built-in |
|
PCIe |
mini PCIe for 2G/3G/4G LTE module |
|
SD card |
Compatible with SDIO 3.0 protocol, system boot up supported |
|
SIM card |
Micro sim slot for Mini-PCIe 4G LTE module |
|
RJ-45 |
10/100/1000-Mbps data transfer rates |
|
RTC |
2Pin GH1.25 connector, RTC power on and off supported |
|
Serial port |
2x RS232 and 1x RS485 |
|
Keys |
3x keys (power, reset, update) |
|
Power output |
12V, 5V, 3.3V |
|
INPUT & OUTPUT |
5x INPUT detect with optocoupler isolation, 5x 12V voltage output with GPIO control |
|
Others |
2x ADC, 2x I2C(CTP supported), IR in, 2x SPI, 4x GPIO |
