DGDK-3364

AXELERON? CS K-3364 NT CPD High Density Polyethylene Solid Insulation Compound 陶氏塑料 产品说明 AXELERON? CS K-3364 NT CPD is a high-molecular weight, high-density polyethylene insulation compound ("CPD") specifically formulated to provide excellent oxidative stability, toughness, and abrasion resistance. It provides superior long term aging performance, while providing excellent environmental and thermal stress-cracking resistance. In addition, AXELERON? CS K-3364 NT CPD provides excellent processability for high-speed wire insulating extrusion processes. AXELERON? CS K-3364 NT CPD provides good performance for telephone insulation applications, primarily cable designs for aerial environments. AXELERON? CS K-3364 NT CPD is optimized to meet major international age testing standards and specifications for both solid and foam/skin insulation use. Specifications AXELERON? CS K-3364 NT CPD meets the following raw material specifications: ASTM D 1248 Type III Category A-4, Grade E8 and E9 Federal LP-390 C, II-H, Grades 1 and 2, Category 4 ISO 1872-PE, KHKN,45-D006 Telephone wire insulated with AXELERON? CS K-3364 NT CPD, using sound commercial extrusion practices, should meet the following cable specifications: ICEA S-84-608 EN-50290-2-23 IEC 60708 DIN VDE 0819-103 BS 6234 type H03 NF C 32-060 基本信息 薄壁绝缘 电话绝缘体 电线电缆应用 固体绝缘 用途 通信电线绝缘材料 ASTM D 1248, III, Class A, Cat. 4, Grade E8 FED L-P-390C, Type II, Class H, Category 4, Grade 1 ASTM D 1248, III, Class A, Cat. 4, Grade E9 BS 6234 Type H03 IEC 60708 EN 50290-2-23 NF C 32-060 机构评级 形式 ICEA S-84-608 粒子 物理性能 额定值 单位制 测试方法 ASTM D792 ASTM D1238 ASTM D1693 密度 0.947 g/cm? g/10 min hr 熔流率(熔体流动速率) (190°C/2.16 kg) 抗环境应力开裂 (100°C, 100% Igepal, F0) 0.75 > 48.0 机械性能 抗张强度 额定值 23.4 单位制 MPa 测试方法 ASTM D638 ASTM D638 伸长率 (断裂) 500 % 老化 额定值 单位制 测试方法 ASTM D638 ASTM D638 拉伸强度保持率- 48 hrs (100°C) 伸长保持率- 48 hrs (100°C) 90 90 % % 热性能 额定值 > 96 单位制 测试方法 ASTM D2951 ASTM D746 耐热应力裂纹- F0 脆化温度1 hr -76.0 °C 电气性能 额定值 > 1.0E+15 2.32 单位制 测试方法 ASTM D257 ASTM D1531 ASTM D1531 体积电阻率 (23°C) 介电常数2 (1 MHz) 耗散因数 (1 MHz) ohms cm 6.0E-5 挤出 额定值 单位制 熔体温度 218到260 °C 挤压说明 AXELERON? CS K-3364 NT CPD provides excellent surface finish and good output rates over a broad range of extrusion conditions. AXELERON? CS K-3364 NT CPD is typically extruded at melt discharge temperatures ranging from 218-260°C (425-500°F) using conductor preheats ranging from 110-140°C (230-290°F). Specific extrusion conditions can be recommended only when the application, processing speed and processing equipment details are known. 备注 1. 2. F0 After 14 days Water Immersion at 23°C (73°F) 本页面信息资料来自厂商，文档提供者不承担任何法律责任，强烈建议在最终选择材料前，就数据值与材料供应商进行验证。版权归原作者所有，如有侵权请立即与我们联系。 Page 1