PCB力锤传感器

 美国PCB力锤传感器原厂品质

Platinum Stock Products; Multi-purpose, ICP? force sensor, 100 lb comp., 100 lb tension, 50 mV/lb

• Measurement Range: (Compression) 100 lb(0.4448 kN)
• Sensitivity: (±15%) 50 mV/lb(11241 mV/kN)
• Low Frequency Response: (-5%) 0.001 Hz
• Upper Frequency Limit: 36000 Hz
• Temperature Range: -65 to +250 °F(-54 to +121 °C)
• Mounting Thread: 10-32 Female
• English: SI:  
  PERFORMANCE
  Sensitivity (±15 %) 50 mV/lb 11241 mV/kN  
  Measurement Range (Compression) 100 lb 0.4448 kN  
  Measurement Range (Tension) 100 lb 0.4448 kN  
  Maximum Static Force (Compression) 600 lb 2.669 kN  
  Maximum Static Force (Tension) 500 lb 2.224 kN  
  Broadband Resolution (1 to 10000 Hz) 0.001 lb-rms 0.004 N-rms [2] 
  Low Frequency Response (-5 %) 0.001 Hz 0.001 Hz [3] 
  Upper Frequency Limit 36000 Hz 36000 Hz [4] 
  Non-Linearity ≤1 % FS ≤1 % FS [1] 
  ENVIRONMENTAL
  Temperature Range -65 to +250 °F -54 to +121 °C  
  Temperature Coefficient of Sensitivity ≤0.05 %/°F ≤0.09 %/°C  
• 
  ELECTRICAL
  Discharge Time Constant (at room temp) ≥500 sec ≥500 sec  
  Excitation Voltage 20 to 30 VDC 20 to 30 VDC  
  Constant Current Excitation 2 to 20 mA 2 to 20 mA  
  Output Impedance ≤100 Ohm ≤100 Ohm  
  Output Bias Voltage 8 to 14 VDC 8 to 14 VDC  
  Spectral Noise (1 Hz) 0.000135 lb/√Hz 0.000603 N/√Hz [2] 
  Spectral Noise (10 Hz) 0.0000276 lb/√Hz 0.000123 N√Hz [2] 
  Spectral Noise (100 Hz) 0.00000956 lb/√Hz 0.0000427 N/√Hz [2] 
  Spectral Noise (1000 Hz) 0.00000212 lb/√Hz 0.00000946 N/√Hz [2] 
  Output Polarity (Compression) Positive Positive  
  PHYSICAL
  Stiffness 6 lb/?in 1.05 kN/?m [2] 
  Size - Hex 0.625 in 15.88 mm  
  Size - Height 0.625 in 15.88 mm  
  Size - Sensing Surface 0.500 in 12.7 mm  
  Weight 0.80 oz 22.7 gm  
  Housing Material Stainless Steel Stainless Steel  
  Sealing Hermetic Hermetic  
  Electrical Connector 10-32 Coaxial Jack 10-32 Coaxial Jack  
  Electrical Connection Position Side Side  
  Mounting Thread 10-32 Female 10-32 Female  
  All specifications are at room temperature unless otherwise specified.
  Product Notes
  [1] Zero-based, least-squares, straight line method.
  [2] Typical.
  [3] Calculated from discharge time constant.
  [4] Estimated using rigid body dynamics calculations.
  [5] See PCB Declaration of Conformance PS023 for details.
  Accessories:
  Supplied
  080A81 Thread Locker (1)
  081B05 Mounting Stud (10-32 to 10-32) (2)
  084A03 Impact Cap (1)
  M081A62 Mounting stud, 10-32 to M6 x 1, BeCu with shoulder (2)
  Optional Versions:
  (N) Negative Output Polarity
    ENGLISH SI
  (TLD) TEDS Capable of Digital Memory and Communication Compliant with IEEE 1451.4
    ENGLISH SI
      Output Bias Voltage 8 to 15 VDC
  (W) Water Resistant Cable
    ENGLISH SI
  
•