玻璃钢横流式低噪音冷却塔

LYR型工作原理 本系列横流式玻璃钢冷却塔采用两侧进风，靠顶部高性能的风机，使空气经由塔两侧的填料，与热水进行介质交换，湿热空气再排向塔外。填料采用两面有凸点的点波片，通过安装头使点波片粘结成整体，以提高刚性，两面的凸点还可以避免直接滴水，因此提高了水膜形成能力，填料尾部设有收水措施。 Working principle of the LYR. Type On both sides of the series of cross-flow FRP cooling tower used in the wind, on the top of high performance fan, make the air through the tower packing, on both sides of the medium to exchange with hot water, hot and humid air outside released back to the tower. Filler used on both sides there are salient points of wave plate, by installing head make point wave plate bonding into a whole, in order to improve the rigidity, the two sides of the convex point also can avoid the water directly, thus improve the ability of water film formation, packing the tail has a closed water measures. 设计特点/Design features 1、节省空间，结构轻型化/Save a space, light-duty structures 采用专为本系列冷却塔设计的高效热交换材料，其换热面积大幅度提高，与原HBLD系列及原HBLCD系列相比，其占地面积大幅度下降，由于结构设计的优化及采用钢结构，运转重量也大大降低。 Using specially designed for this series of cooling tower of efficient heat exchange material, its heat transfer area increased significantly, compared with the original HBLD series and the original HBLCD series, it covers an area of a sharp drop, due to the structural design optimization and adopts steel structure, operating weight also greatly reduced. 2、良好的耐腐蚀性/Good corrosion resistance 塔体、水槽及面板均采用具有良好耐腐蚀性能的FRP材质，并在胶衣树脂中加有光稳定剂，具有良好的抗老化性能，经久不变色。塔体钢结构件在加工后采用热镀锌处理，提高冷却塔的耐腐蚀性能，在正常使用寿命内，不需要另外防腐。 Tower body, sink and panel adopt has good corrosion resistance performance of FRP materials, and add a light stabilizer to the gel coating, has a good anti-aging performance, do not change color. Steel tower structure using galvanized processing after processing, improve the corrosion resistance performance of the cooling tower, within normal service life, without additional anti-corrosion. 3、组合式设计/Modular design 组合式设计，使工程与使用单位选择更加灵活实用，生产厂家交货更加快捷，安装单位组装更加方便，且在实际使用中，可以根据势源增减而自动开闭冷却塔塔体，达到更加节省能源。 Modular design, make the engineering unit selection and use is more flexible and practical, the manufacturer delivery faster, more convenient installation unit assembly, and in the actual use, can according to the power source and open and close automatically increase or decrease the cooling tower body, achieve more to save energy. 4、节能省电/Energy saving save electricity 低风阻散热填料配合独特流线型设计之风筒及大叶玄之高效能风扇，大大节省马达的耗电功率。 Low wind resistance heat packing with unique streamline design of ram, and a large Ye Xuan efficient fan, greatly saves the electricity power of the motor. 5、耐用持久/Durable lasting 塔体采用强化玻璃钢制造，不会腐蚀，减低保养及维修成本。所有塔体支架采用厚身钢材制造，并经过热浸锌处理，达到国家标准，长时耐用。 The tower body is made of reinforced plastic). Not corrosion, reduce maintenance costs. All manufactured thickened steel tower body stents, and after hot-dip zinc treatment, durable. 6、噪音低/Low noise 大叶玄及流线型设计之风扇叶，再加上低转速运行使风扇特别安静。 Large Ye Xuan and streamlined design of fan blade, combined with low speed running makes special quiet fan. 7、容易组装/Easy to assemble 组合式设计，配件轻便使运输及安装简易。 Modular design, light fittings to transport and easy to install. 横流式冷却塔零部件特点介绍LYR型冷却塔部件特点介绍 一、电机 冷却塔电机：1.采用专业防水电机，防护等级达IP55，电机轴镀铬腐，绝缘等级为F级。该电机具低噪音、低振动、宽电压、高效率、密封防水等优点，额定电压：380V，频率50HZ。 The motor Motor cooling tower: 1. Using professional waterproof motor, protection grade reaches IP55, motor shaftchrome plated anti-corrosion, insulation class F. 2. The electric machines and low noise, low vibration, high efficiency, wide voltage, and the advantages of waterproof sealing, rated voltage: 380 v, 50 hz frequency. 二、风扇 冷却塔专用风扇，高级铝合金材质，有宽幅叶片和机翼中空型叶片等设计。风量大、噪音低、效率高、耗能低。设有刻度便于手动调整风扇角度。配合良壹高强度风胴，流线型设计，出风顺畅。 the fan cooling tower dedicated fan, high aluminum alloy material, there are wide blade and wing type hollow bladedesign. Big air volume, low noise, high efficiency and low consumption. Without dial to manually adjust the Angle of the fan. Cooperate LiangYi high strength the trunk of the wind, streamlined design, smooth out the wind. 三、散水装置 采用重力式散水设计，FRP散水槽设计。根据流量不同，每种规格散水槽散水孔径、数量均不同，以使散水槽的液位高度保持一致，散水槽与填料之间设计分水片，进一步将水流分散，使落在散热材质上的水分布更均匀。 aproll device adopts the design of gravity aproll FRP tank design. According to different traffic, scattered sinkaproll pore diameter and number of each specification are different, so that the bulk tank liquid level height consistent, scattered between sink and packing design water, further spread the water, make the fall in the water on the heat dissipation material distribution more uniform. 四、减速机组 采用皮带传动，运转平稳，噪音小。设计皮带箱上下盖保护，不受外界水汽影响。FRP材质，运转安全，便于操作维护。采用高级进口皮带，确保使用强度及寿命。 the reduction unit adopts the belt drive, smooth operation, low noise. Design the belt box cover to protect fromtop to bottom, is not affected by external water vapor. FRP material, operational safety, ease of operation and maintenance. Adopt advanced imported leather belt, make sure you use strength and life. 五、壳体 塔体外侧浪板及水盘均采用玻璃纤维强化塑胶（FRP）材质，FRP用耐水性树脂与无碱玻璃纤维毡，浸润性好，含胶量高，强度高，本体表面光洁度高，具有不易褪色，抗老化，抗紫外线，造型美观。入风口选装顺风板，采用高级PVC与工程塑料及抗紫外线剂等材料挤拉成型，密实耐用，对入风加以整流，且具有挡水功能。 Water tower body of the lateral wave plate and shell plate are made of glass fiber reinforced plastic (FRP) material,FRP with water resistance resin with non-alkali glass fiber mat, invasive good, high rubber content, high strength, high surface finish of ontology, is not easy to fade, anti-aging, anti-uv, aesthetically pleasing. Into the tuyere options with the wind plate, adopt advanced PVC and engineering plastics and ultraviolet resistant agent and other materials pultrusion molding, solid and durable, rectifier for into the wind, and have the function of retaining water. 六、填料 高级PVC原生料真空成型，片材厚度均匀，强度及韧性高。选用不透明，抗紫外线材料，结合整体斜波悬挂式结构，可获得最大换热面积及大气流通过空间，片材之波形与片间距经严格计算及多次测试而得，散热系数高，安装方便，美观。 senior PVC packing original with vacuum forming materials, sheet thickness, high strength and toughness. Chooseopaque, anti-uv material, combined with the overall oblique wave hanging structure, can obtain the maximum heat transfer area and the best air flow through the space, sheet waveform and the spacing of the strict calculation and test for many times, high coefficient of heat transfer, installation is convenient, beautiful.