厂商 :东莞市泽泰新材料有限公司
广东 东莞市- 主营产品:
- 锣牌工业润滑油
- 高温链条油
- 高温润滑脂
钼基极压润滑脂
MG GREASE EP LP 2
简介 |
|
DESCRIPTION |
LP2多用途极压类润滑脂,系采用ISO220精炼矿物基础油、锂稠化剂、极压添加剂、防锈剂、抗氧剂、增粘剂和二硫化钼精心配制而成。 。优点:
●降低维修保养费用:本产品有效的极压添加剂,再加上二硫化钼固体薄膜润滑剂的配合使得本产品在恶劣运行条件和冲击载荷的情况下也能够防止零部件出现磨损。特殊的防锈防腐蚀添加剂使得它在潮湿的运行条件下也能够有效地防止金属表面出现锈蚀和腐蚀,
●减少停机检修时间:本产品具有极强的抗氧化能力,使用寿命长。
●使用方便:锂稠化剂具有良好的泵送特性,这使得本产品的流动特性特别适用於采用润滑脂泵使用的润滑系统。
|
|
LP2 Multipurpose grease containing an iso 220 mineral base oil ,lithium thickener ,ep additives and rust and oxidation inhibitors, plus molybdenum disulfide .. Features * Reduces the service maintenance costs: This product effective additives, in addition the molybdenum disulfide solid thin film lubricant coordination causes this product in the bad movement condition and in the impact load situation also can prevent the spare part appears the attrition.The special rust prevention anticorrosive additive enables it under the moist movement condition also to be able to prevent effectively the metal surface appears the corrosion and the corrosion, * Reduced engine off overhaul time: This product has the greatly strengthened oxidation resistance ability, the service life is long. * Easy to operate: The lithium gelatinizer has the good pump over characteristic, this causes this product the flow quality to be suitable specially in uses the lubrication system which the lubricant pump uses. |
用途 |
|
APPLICATION |
车用、建筑用、土建、矿山工程、农用设备、底盘润滑脂润滑部位、轴销与轴套、滚动轴承、球窝接头、万向节、高负荷、冲击负荷场合。 连续运行时的适用温度范围为-30℃至130℃。 短时间最高使用温度为175℃。
|
|
*Automotive、construction earthmoving、quarrying and mining、agricultural equipment、chassis grease point lubrication、pins and bushings 、rolling element bearings 、ball joints、universal joints(u-joints)、high and shock load applications.Usable temperature range in continuous service is -30℃ to 130℃.Maximum temperature for short term exposure is175℃.. |
Characteristics特 性
NLGI 级别 |
Dropping pant°C 滴点 |
Molyhrnum fiduigifr,m% 二硫化钼,质量百分数(%) |
Oil viscosity基础油黏度倾 40 /100 mm/s |
Penctration 25,worke@℃25℃下外理后的1/4针入度 |
Thickener thithium,m% 稠化剂(锂),质量百分数(%) |
Timden kg 负荷KG |
2 |
195 |
3 |
208/18.2 |
64-74 |
7.5 |
14 |
1 |
195 |
3 |
208/18.2 |
76~85 |
6.5 |
14 |
0 |
195 |
3 |
208/18.2 |
88~97 |
5.8 |
14 |