厂商 :深圳市鑫瑞阳科技有限公司
广东 深圳市- 主营产品:
- 模拟量输入输出模块
- 数据采集模块
- 数据采集卡
PISO-CAN100U-T产品介绍:1-Port Isolated Protection Universal PCI CAN Card with 5-Pin Screw Terminal Connector
产品特点:
|
产品规格;
Bus Interface |
||
Type |
Universal PCI, 3.3 V and 5 V, 33 MHz, 32-bit, plug and play |
|
CAN Interface |
||
Controller |
NXP SJA1000T with 16 MHz clock |
|
Transceiver |
NXP 82C250 |
|
Channel number |
1 |
|
Connector |
9-pin male D-Sub |
5-pin screwed terminal block |
Baud Rate (bps) |
10 k, 20 k, 50 k, 125 k, 250 k, 500 k, 800 k, 1 M (allow user-defined baud rate) |
|
Terminator Resistor |
Jumper for 120 Ω terminator resistor |
|
Power |
||
Power Consumption |
225 mA @ 5 V |
|
Software |
||
Driver |
Windows 2K/XP/7, Linux 2.6.37, LabView, DASYLab |
|
Library |
VB 6.0, VC++ 6.0, BCB 6.0, Delphi 4.0, C#.Net, VB.Net |
|
Mechanism |
||
Dimensions |
126mm x 22mm x 85mm (W x L x H) |
|
Environment |
||
Operating Temp. |
0 ~ 60 ℃ |
|
Storage Temp. |
-20 ~ 70 ℃ |
|
Humidity |
5 ~ 85% RH, non-condensing |
PISO-CAN100U-D产品介绍:1-Port Isolated Protection Universal PCI CAN Card with 9-Pin D-Sub Connector
产品特点:
-
One CAN bus communication port
-
Compatible with CAN specification 2.0 parts A and B
-
On-board optical isolation protection
-
Programmable transfer rate up to 1 Mbps
-
2500 Vrms photo couple isolation on the CAN bus
-
Jumper select 120Ω terminator resistor for each port
-
Direct memory mapping to the CAN controllers
-
33MHz 32bit 5V PCI bus (V2.1) plug and play
-
Universal PCI card, supports both 5V and 3.3V PCI bus
-
供应泓格FRnet总线8路隔离数字量输出模块FR-2156T
-
供应泓格FRnet总线8路隔离数字量输入模块FR-2152T
-
泓格FR-2057HT 支持 FRnet 高速模式的 FR-2057T
-
供应泓格FRnet总线16路隔离数字量大电流输出模块FR-2057TW
-
深圳供应泓格FRnet总线16路隔离数字量输出模块:FR-2057T/FR-2057TA
-
供应泓格FR-2057TW:16路隔离数字量大电流输出模块
-
供应泓格FR-2054T: FRnet总线8路数字量输出8路
-
深圳供应泓格FR-2053T/FR-2053TA模块
-
鑫瑞阳供应多串口通讯卡
-
泓格FRB-200/FRB-200U: 2口FRnet总线通讯卡