简   介

DEION

KANUO LP-1156油性脱模剂（无添加）是不含危害人体物质的高纯度脱模剂。热稳定性好。可用於精密及多行位，扣位的复杂模具。

优 点：

-超精细喷射使整个模得到完全覆盖

-提高光洁度，减少喷涂过量的风险

-运用了食品级硅酮，可用于印刷、喷涂、粘贴胶件和需要二次加工的塑料件。

-减少因标记及运送时所产生的有关问题，快捷有效  

脱模且极具经济效益，只需一次喷涂便可多次脱模

-效能高而持久性强的润滑膜，能提供多次脱模

-对环境影响小，不含氯氟化碳（CFC）推进剂

KANUO LP-1156 MOULD RELEASE AGENT(NON - PAINTBLE) is an aerosol applied release agent comtaining a highly effective silicone oil, specially formulated to provide a quick, effective, non-staining release of plastics and rubber for most types of plastic injection moulding.

Benefits：

-Ultra fine spray gives controlled application with complete coverage

-Improved finish and reduced risk of over application

-Reduces problems associated with marking and transfer, highly economical, efficient release, only one pass required for many shots of ejection

-Effective and long lasting film provides more numbers of release than most silicone formulations

-Low environmental impact, contains no CFC propellant

Non staining property makes it an excellent lubricant for textile and paper industry.

注意事项

PRECAUTIONS

-压力容器，避免阳光直接照射，存放在温度低於50°C的地方。

-切勿将容器戳穿或焚烧。

-不应喷向火焰或白炽的金属表面。

典型组分：

推进剂                   液化石油气

溶剂                    正己烷

活性成份                 硅 油

-Pressurised container, protect from sunlight, store at temperature below 50℃

-Do not puncture or incinerate

-Do not spray on to naked flames Inflammable

Typical Date：

Propellant                     LPG                

Solvent                     Chlorinated Solvent

Active ingredient            Silicone Oil