厂商 ：株洲逸诚硬质合金有限公司-销售部
湖南 株洲市- 主营产品：
- 硬质合金
- 硬质合金刀片
- 硬质合金圆棒
株洲逸诚硬质合金有限公司
一、硬质合金产品的特点
1、硬质合金产品采用稀有金属钨和钴作为主要成分，硬质合金产品采用独特的生产工艺，使产品性能和使用寿命与其他材料相比要更加实用。
2、硬质合金产品具有很好的耐磨性和韧性。通过低压烧结后，产品的硬度和强度比普通真空烧结的性能要提高30%左右。
3、用途广泛，应用于军工、航天航空、机械加工、冶金、石油钻井、矿山工具、电子通讯、建筑等领域。
二、产品细节及材牌号选择
钨钢刀片可分为机夹刀片，焊接刀片两大类，广泛应用于车削刀片，铣削刀片，螺纹刀片，切断刀片，凹圆弧成型刀片，轮毂车刀等加工中，我司针对碳钢，合金钢，铸铁，软钢，淬火钢，锰钢，不锈钢，耐热金属，有色金属，非金属材料分别配制了不同牌号的硬质合金。刀片具有很高的切削性能，耐磨性，抗冲击性，抗热震性。常规刀片现货供应，非标型号可来图定做。
ISO
分类
分组
代号
ISO
Code
牌号
Grade
物理力学性能
Physical and
Mechanical
properties
推荐用途
Applications
recommended
密度
Density
G/cm
硬度
Hardness
HRA(HV)
抗弯强度
TRS
Mpa
K05
YG3
15.0
90.5
1300
适用于铸铁，有色金属的精加工。
Suitable for finishing cast iron and nonferrous metal
K10
YG6X
YG6A
14.8
14.7
91
91.5
1560
1510
适用于铸铁，有色金属的精加工,半精加工，亦可用于锰钢，淬火钢加工。
The finishing &semi-finshing of cast iron and nonferrous metals and al so forthe machining manganese steel and hardening steel
K15
YG6
14.9
89.5
1670
适用于铸铁，轻合金的半精加工，亦可作铸铁，低合金钢铣削加工。
Suitable for the roughing of cast iron and light alloys and also for the milling of cast iron and low-alloy steel
K20
YG8
14.6
89.0
1840
适用于不锈钢，普通合金钢的精加工和半精加工。
Suitable for finishing and semifinishing of stainless steel and lowalloy steel and it is mainly uesd for the machining of railway wheel hubs
M10
YW1
YW3
YW4
13
12.9
12.3
91
92
92
1290
1390
1390
适用于不锈钢，普通合金钢的精加工和半精加工。
Suitable for finishing and semifinishing of stainless steel and conventional alloy steel
M20
YW2
12.9
90.5
1460
适用于不锈钢，低合金钢的半精加工，主要用于火车轮毂加工。
The grade can be used for the semifinishing of stainless steel and lowalloy steel and it is mainly uesd for the machining of railway wheel hubs
P10
YT05
YT115
12.6
11.3
92.5
91.0
1260
1300
适用于钢，铸铁的精加工和半精加工，宜采用中等进给量和较高的切削速度。
Suitable for the finishing and semifinishing of steel and cast steel with a moderate feed rate and a rather high cutting speed
P20
YS14
YT14
YS25
11.4
11.4
13.0
91.5
90.5
90.5
1550
1400
1780
适用于钢，铸钢的精加工和半精加工，宜采用中等进给量。YS25专用钢，铸钢的铣削加工。
Suitable for the finishing and semifinishing of steel and cast steel YS25 is specially used for the milling of steel and cast steel
P30
YT5
12.8
89.5
1560
适用于钢，铸钢的重切削加工，在作业条件不好的中，低速度大进给量粗加工。
Suitable for the heavy duty rough tuming of steel and cast steel with a big feed rate at a medium and low speed under unfavorable working conditions
K05-K10/M20
YT26
14.0
92.5
1600
红硬性高，耐寒性好。造于冷硬铸铁、有色金属的精加工、半精半精加工亦可用于锰钢、淬火钢的车削、铣削加工。
Suitable for fine and semi-finishing machining of chilled cast iron and non ferrous metals with good performances of ther mosetting and wear resistance,also suitable for turning and milling of manganese steel and hardened steel.
K20
YD201
14.90
91.0
1800
适用于铸铁，轻合金的半精加工、粗加工、亦可作为铸铁、低合金钢的铣削加工
Suitable for semi-finishing and the roughing of cast iron and lisht alloys and also for the milling of cast iron and low alloy steel
M1O
YS8
13.9
92.5
1500
主要用作石油管螺纹的加工，亦可用作淬火钢的精加工
Mainly used for threading of petroleum pipe,also used for fine machining of hardened steel
M20
YM20
13.0
91.0
1750
钢、铸钢、锰钢、灰口铸铁、中等切削速度和进给量下的半精车和半精铣。
P30
YC30S
12.9
90.0
1600
适用于钢和铸钢以及合金钢的铣削加工
Used for the milling of steel and alloy steel.
P35-P40
YC40
12.90
91.0
2200
适用于钢、铸钢的强力切削，宜在恶劣的条件下低速切削和大进给量切削加工
Suitable for the heavy duty turning of steel and cast steel with a big feel rate under
P40
YM40
YC45
12.75
12.75
90.0
90.0
2100
2300
适用于钢、铸钢的重力切削、可采用大切削用量，亦可用于端面铣削
Suitable for the heavy duty tuming of steel and cast steel with a big steel rate and also for face milling
三、硬质合金生产工艺流程
