KBS2弹簧施力制动器

KBS2弹簧施力制动，气动驱动释放
厚度为25.4-30-40mm的制动盘同样适用。

Available also for disc thickness 25.4-30-40mm.

技术数据
制动力F:
KBS2-1 2750N
KBS2-2 5500N
KBS2-3 10970N
加速力矩
=F [制动盘半径（m）-0.031]=Nm
一对摩擦片最大总磨损：16mm
新单片摩擦片厚度：16mm
持续散热功率
Qc：1.7KW
双刹车块型持续散热功率 Qc：2.7KW
最小释放压强：5bar
采用以下弹簧数量可达左图指示力
矩数值：
2-1型 4根弹簧
2-2型和2-3型 8根弹簧
若要减少力矩可相应地减少弹簧数量：
2-1型减少至2根弹簧
2-2型和2-3型减少至6、4、2根弹簧
图表指示了每毫米摩擦片磨损的力
矩变化情况。

根据要求调整力矩值。

Technical data
Braking force F:
KBS2-1 2750 N
KBS2-2 5500 N
KBS2-3 10970 N
Dynamic torque
= F.(disc radius in m - 0.03) = Nm
Max total wear: 16 mm
Thickness of new lining: 16 mm
Continuous thermal capacity Qc: 1.7 kW
Continuous thermal capacity
for double pad version Qc: 2.7 kW
Minimum release pressure: 5 bar
The torque values specified
are obtained with n. 4 springs for 2-1,
n. 8 springs for 2-2 and 2-3.
Torque proportionally less are
achievable with n. 2 springs for 2-1,
n. 6-4-2 springs for 2-2 and 2-3.
The diagram shows the torque
variation for each millimeter
of linings wear.
Adjust according to ensure the

correct torque value is achieved.