JBL CBT50LA-1

JBL CBT50LA-1 CBT50LA-1-WH 线阵列音箱 壁挂音柱 会议室报告厅音箱 线性阵列音箱 JBL恒定波宽的线阵列音箱 JBL会议音箱 低声压应用 视频监听 专卖店中央广场 客运中心 补声应用 会议低声压应用 视频监听 专卖店 中央广场 客运中心 补声应用 会议室 风格建筑

 

 这就是声海创新带给大家“JBL CBT50LA-1 ”的介绍。如果想了解更多产品价格可以点击查看产品请点击全部商品分类，了解更多品牌请点击品牌分类，致电咨询我们客服更优惠

 

24小时服务热线：18618339665，13146744100,13141244200

QQ: 2899296168 , 2782522719 , 2734604569 , 2752684760

 

 

JBL CBT50LA-1 (黑色）

JBL CBT50LA-1-WH（白色）

产品描述:

JBL CBT 50la-1线阵列扬声器功能柱恒定束宽的技术，所以它非常适合使用在演讲厅，运输中心，会议室，礼堂，多功能的空间，建筑空间，在壁凹的位置，和更多。该技术降低了狭窄的垂直辐射和从覆盖波瓣法是典型的直形因子无源音箱柱。这种灵活的，紧凑的扬声器是专为室内和室外使用并具有可切换发音控制（音乐或语音）。该模型采用了一种改进的安装支架，使用时，可以提供更大的灵活性，在针对扬声器。

主要特点

正在申请专利的技术，提供恒定束宽恒定指向性最高的频率和减少了覆盖波束

可切换发音提供平坦的响应在音乐模式或中档存在峰值在语音模式

动态sonicguard过载保护

内置70v/100v变压器，加8Ω直接能

改进的安装支架

包括旋转（PAN）/倾斜壁支架提供连续可变的+ / - 80度左右旋转的目标（在没有向上/向下倾斜）

连续可调的+ / - 15度倾斜，以及5点范围内的固定增量

十螺纹安装点位于后面板符合工业标准的矩形4.25×2”（108×51mm）为该30和其他兼容的第三方括号模式

螺纹安装点可用于悬挂

技术指标:

产品描述 :    由8个2英寸单元组成的50厘米竖直线阵列，带恒定波宽专利电路

产品应用 :    低声压应用，视频监听，专卖店，中央广场，客运中心，补声应用，会议室，风格建筑

可选性  

垂直覆盖 :    20度

均衡     :    音乐(平坦) / 语言

抽头设置 :    70V/100V : 60W多抽头，8欧姆

性能    

频率响应(-10dB)    :    80Hz-20kHz

灵敏度

(SPL @1m)     :    93dB

功率(低阻)    :    150W

最大声压级    :    115dB(峰值121dB)

覆盖控制频率(±20度)   :    1500HZ

安装     :    10个M6吊挂点，包含墙装支架

尺寸     :    528 x 99 x 153 mm  (20.8 x 3.9 x 6.0 in)

Constant Beamwidth Technology? Line Array Column Loudspeaker with Eight 50 mm (2 in) Drivers. With improved mounting bracket for enhanced aiming flexibility.

The CBT 50LA-1, with Constant Beamwidth Technology?, represents a breakthrough in pattern control, utilizing analog delay beam-forming and amplitude tapering to accomplish consistent vertical coverage without the narrow vertical beaming and out-of-coverage lobing that are typical of straight form-factor passive column speakers.

 

FEATURES

Patent-pending Constant Beamwidth Technology? provides constant directivity up to the highest frequencies and reduces out-of-coverage lobing.

Switchable voicing provides flat response in music mode or mid-range presence peak in speech mode.

Dynamic SonicGuard? overload protection

Built-in 70V/100V transformer, plus 8 ohm direct capability.

Swivel (pan) / tilt wall bracket included.

 

SPECIFICATIONS

Components Eight 50 mm

(2 in) Full-Range

Frequency Range (-10 dB) 80 Hz – 20 kHz

Coverage Pattern Vertical 20° (1.5 kHz - 16 kHz, ±10°)

Horizontal 150° (ave, 1 kHz – 4 kHz, ±20°)

Sensitivity (2.83V@ 1m) 93 dB (speech mode, 2 kHz - 14 kHz)

89 dB (music mode, 300 Hz - 18 kHz)

Nominal Impedance 8 ohms

Power Capacity

(8 ohm setting) 150W (600W peak), 2 hrs

100 W (400W peak), 100 hrs

Max SPL Speech mode: 115 dB cont ave (121 peak)

Music mode: 111 dB cont ave (117 peak)

70V/100V Transformer Taps 60W, 30W, 15W, (7.5W at 70V only), and 8Ω thru, via switch

Enclosure Fiberglass reinforced ABS cabinet, painted aluminum grille

Outdoor Capability IP-55 rated, per IEC529, when installed with optional MTC-PC2 panel cover. UV, moisture and 200-hr ASTM G85 acid-air/salt-spray resistant.

Colors Black or White (-WH)

Insert Points Ten M6 insert points on back panel.

Mounting Included swivel (pan) / tilt wall bracket provides continuously variable +/-80 degree left-right swivel aiming (at no up/down tilt -- see Bracket Guide for maximum swivel range at various up/down tilt angles), continuously adjustable ±15 degree tilt, as well as 5 degree fixed increment points within the range. Ten threaded mounting points located on back panel conform to industry standard rectangular 108 x 51 mm (4.25 x 2.0 in) pattern for OmniMount? 30.0 and other compatible third-party brackets. Threaded mounting points can be utilized for suspension.

Dimensions (H x W x D) 528 x 99 x 153 mm

(20.8 x 3.9 x 6.0 in)

Net Weight 4.1 kg (9.0 lb)

Included Accessories Swivel (pan) / tilt wall bracket

Optional Accessories MTC-PC2 terminal panel cover

MTC-CBT-FM1 flush-mount low-profile wall-mount bracket

MTC-CBT-SMB1 Stand-Mount Bracket for use with 35 mm speaker stand